Tormek Products

249,95List price ~~€ 274,95~~

Tormek dbs - 22 drill attachment

All our products have a warranty of at least 1 year.

52,95List price ~~€ 71,48~~

Technical details of the Tormek LA - 120. The two standard discs have a radius of 3 mm (1/8 ") and a top angle of 60 °. The set of optional discs has a radius of 2 mm (3/32 ") and a top angle of 45 °. With the narrower discs, tools with very narrow profiles can be easily polished. For faster polishing, the diameter of the larger disc is increased from 100mm (4 ") to 120mm (4¾"). The new design compared to the LA-100 provides a larger space between the discs and thus gives more work space when polishing your tools. The LA-120 fits your current LA-100 (or LA-100 on the LA-120) and allows you to use the 2 disks on the same machine. You can also attach double LA-120 discs to each other, for example 1 with a standard profile and 1 with the narrow discs so that you can use 4 different profiles.

23,95List price ~~€ 26,35~~

Tormek mh - 380 machine cover

Technical data of the Tormek MH - 380 Machine Cover. Protects the machine against damage and dust.

188,95List price ~~€ 255,08~~

Tormek please - 80 attachment profile cutter

These items do not fit on the HBM 250 universal tool sharpeners.

51,95List price ~~€ 57,15~~

Tormek rb - 180 turntable

All our products have a warranty of at least 1 year.

49,95List price ~~€ 54,95~~

Tormek rm - 533 rubber mat

Technical data of the Tormek RM - 533 Rubber mat. Dimensions

205,95List price ~~€ 278,03~~

Tormek sb - 250 blackstone sillicon

All our products have a warranty of at least 1 year.

60,95List price ~~€ 67,05~~

Tormek se - 76 chisel sharpening attachment

Technical data of the Tormek SE - 77 Chisel Sharpening Aid. The grinding tool consists of a clamping surface with two clamping screws to secure the tool. The attachment is guided by the Universal guide. The grinding angle can be adjusted by the micro adjuster at the bottom of the Universal guide. The Universal guide has two safety stops that ensure that the grinding aid does not slip off the guide. One stopper on the inside which can be set according to the width of the tool and one stopper positioned on the outside on the outside of the Universal guide. The grinding tool adjusts the tool so that it is at an angle of 90 ° in the grinding tool. Conventional fittings must be adjusted manually. With the lower fixing screw the clamping compartment can be fixed on the inside for shorter tools, for example Japanese chisels. The tool was developed for grinding to the grinding angle then, for grinding away from the grinding angle, the Universal guide can be placed horizontally.

183,95List price ~~€ 202,35~~

Tormek sg - 250 sharpening stone

Technical data of the Tormek SG - 250 Sharpening Stone. Years of development of the grindstone has resulted in the best combination between efficient grinding of steel, a smooth surface finish and a long service life. This stone can be used for grinding * all types of tools and steels, including HSS. The stone is supplied with the Tormek T-7 (SG-250) and the Tormek T-3 (SG-200). The unique composition of the grindstone in combination with the gradation stone SP-650 gives you two different grinding options in one grindstone. The gradation stone grinds the surface of grain 200 to a finish of grain 1000. The original Tormek grindstone is the ideal choice for efficient steel grinding with a smooth finish for a wide range of materials.

Tormek sj - 250 Japanese water stone

All our products have a warranty of at least 1 year.

258,95

28,95List price ~~€ 40,53~~

Tormek sp - 650 sharpening stone flat stone

Technical data of the Tormek SP - 650 Grindstone Flat stone. The original Tormek grindstone has been developed in such a way that the surface can be set up for quick grinding and fine grinding by treating with the gradation stone. The advantage of this is that you can perform both grinding work with the same grinding stone, grinder and attachment setting. You can grade the grindstone by pressing the fine side of the gritstone onto the grindstone, this ensures a fine grain on the grindstone (+/- grit 1000). Pushing the coarser side of the gradation stone onto the grindstone brings the surface back to its original grain. This process does not cause very much wear to the stone and can be carried out repeatedly.

16,95List price ~~€ 23,73~~

Tormek sva - 170 tool for axes

Technical data of the Tormek SVA - 170 Attachment for Axes. The grinding aid comprises a rubber-enclosed clamp, a wedge-shaped stopper, which holds the ax in a fixed position on the grinding stone. The grinding tool is used on the universal guide. The tool has been developed so that turning the stone ensures that the ax remains firmly in place in the sharpening tool. You just have to hold and guide the ax. This grinding tool only works with the stone turning towards the grinding angle. If necessary, the law disk can be removed for more workspace.

35,95List price ~~€ 46,74~~

Tormek svd - 110 universeek sharpening attachment

Technical data of the Tormek SVD - 110 Universeek Grinding Aid. This sharpening support is ideal for sharpening scrapers and special tools for wood carving. Also for paint scrapers and scooping tools. The sharpening support has a large surface, 90 x 110 mm (3½ "x4 1/4") which ensures that you have enough space to work safely.

195,95List price ~~€ 235,14~~

Tormek svh - 320 flat bench knife attachment

These items do not fit on the HBM 250 universal tool sharpeners.

31,95List price ~~€ 43,13~~

Tormek SVM - 00 Small Knife Attachment

All our products have a warranty of at least 1 year.

51,95List price ~~€ 67,54~~

Tormek SVM - 140 Long Blade Sharpening Attachment

All our products have a warranty of at least 1 year.

24,95List price ~~€ 34,93~~

Tormek svs - 32 tool short chisels

Technical data Tormek SVS - 38 Short Chisel Attachment. The SVS-38 was originally developed for short wood carving tools. The attachment has two parallel flanges, on both sides of the universal guide. The design ensures that the attachment keeps the tool in the correct position on the sharpening stone at all times. This is a big advantage, because you can fully concentrate on grinding the grinding angle.

65,95List price ~~€ 89,03~~

Tormek svs - 50 multi knife sharpening attachment

Technical data of the Tormek SVS - 50 Multi Blade Sharpening Aid. The accessory consists of the housing, two replaceable holders, one closed holder and one open holder. The holder can be adjusted in any position between the 0 and 45 ° angle by means of the clamping screw. With this sharpening tool you can sharpen both sides of the tool in one setting by turning the sharpening tool.

46,95List price ~~€ 61,04~~

Tormek svx - 150 scissors sharpening attachment

Technical data of the Tormek SVX - 150 Scissor Grinding Aid. The accessory consists of a support surface and a holder for the scissors with two clamps. Normally you only use the right clamp, for long shears and garden shears you use both clamps. You can adjust the clamp with the screw and then secure the scissors with the clamp screw. The support surface has a smooth surface so that you can easily move over it with your scissors.

400,95List price ~~€ 481,14~~

Tormek t4 universal tool grinder

Power absorbed 120 Watt. |Voltage 230 Volt. |Grindstone Ø 200 x 40 mm, asgat: Ø 12 mm korrel 220 |Dimensions L230 x B200 x H260 mm. |

747,95List price ~~€ 822,75~~

Tormek t8 universal tool grinding machine including SVM-00

Technical data of the Tormek T8 Universal tool grinder including SVD-110. Power consumption 200 watts. Voltage 230 volts. Dimensions of the grindstone Ø 250 x 50 mm, a Ash hole of the grindstone 12 mm, Gritt of the grindstone Grain 220. Dimensions of the law disc Ø 220 x 31 mm. Running time continuous without overheating Noise level 54 dB. Material fully zinc housing with ABS plastic sides. Dimensions L270 x B270 x H330 mm. Weight 14.8 kg. The Tormek T8 Universal tool grinder including SVM-00 is supplied as standard. Tormek SVD - 110 Universeek Grinding aid. angle adjustment jig WM-200 Gradation stone SP-650 Sharpening stone SG-250 LA-220 leather disc PA-70 wet paste Oil for the leather wet disc Universal support Water chute (water slide) EzyLock (to easily tighten the sharpening stone) Diamond calibration device TT-50 The renewed straight chisel holder SE-77 Instruction DVD (multilingual subtitles, also Dutch) Handbook: Wet grinding of cutting tools (in Dutch) Other specifications: The Tormek wet grinder is like a spider in a web of accessories! In fact, the machine is the core of a well thought out system. There are so many accessories available that you are rarely faced with surprises. Almost all tools can be sharpened: from ax to peeling knife, from secateurs to gouges! The T-8 is designed for heavier grinding work and can run continuously without overheating. Tormek T-8 upgrades. Tormek T-8 maximizes precision thanks to the revolutionary fully molded housing that guarantees minimal play for the Universal support. This gives you the best possible conditions to succeed with your grinding. Tormek's unique drive system is efficient and manages to maintain a constant speed, even under full load. The Tormek Original Sharpening Stone sharpens all qualities of steel, including HSS. The machine is equipped with a number of elaborate details such as stone locking with EzyLock, a water basin with lift and a removable magnetic scraper for efficient cleaning. On the new T-8 model, Tormek has integrated the previous mounted brackets into the fully molded housing. This guarantees minimum clearance for the universal support; an innovation to control sharpening improves and increases the accuracy of the final results. For long tools that drip the water over the edge (such as chef's knives and planer blades), you can add the 'water chute'. Put the widest part of the chute in the middle of the basin and the water slide will make the water run straight into the basin again, even with the longest tool! (see photo 6) The removable scraper is equipped with a strong magnet, which attracts the removed steel particles from the ground instruments. This keeps your stone clean. These small steel particles are pressed into the stone surface differently and can influence the sharpening. When you clean the water bowl, you will find that most of these steel particles are on the magnet. When you remove the scraper, the magnet will release the steel particles and you can easily clean the bin. Including renewed SE-77 straight chisel holder. New to this version is that the chisel holder is adjustable for all sizes of chisels. This way your chisel fits tightly in the holder and can no longer shift during grinding and cutting. Tip! Never leave a round water stone in the water. If you do, a part is in the water and a part is not. As a result, the stone 'sinks' and becomes egg-shaped. Once this has been done, the stone can be rounded up again with a calibration device, as this will have a different effect on the grinding result. After use, let the stone rotate for a while without water, so that it goes out and let the machine dry! In addition, a stone can show a slight sideways swing. This has to do with the production process of the stones and has no influence on the cutting result. Pay attention! Is the grindstone not 100% round? First zip the sharpening stone!

83,95List price ~~€ 117,53~~

Tormek tt - 50 diamond sharpening stone

Technical data of the Tormek TT - 50 Diamond Sharpening Stone Ritser. 1. Easy to move over the stone You can move the stone flitter over the stone without applying force. Operate both buttons (left and right) with both hands for a gradual movement of the rocker. Thanks to the controlled movement you get a smooth stone surface without grooves. Grading afterwards with the gradation stone is not necessary. The slower you move the flattener over the stone, the finer the surface becomes, a time frame of 90 seconds about moving over the stone gives you a nice finish of the stone. 2. Control over the surface depth You can precisely adjust the surface depth with the micro adjuster on the universal guide. The new universal conductors have a scale of 0.25mm (0.01 "). You can also use the micro-adjuster without scale, 0.25mm (0.01") then stands for 1/6 turn. 3. Removed more grinding residues With a faster movement over the stone (for example 30 seconds instead of 90 seconds), small grooves are created in the stone, which makes the stone grind coarser and therefore more suitable for harder metals with a large grinding surface.

27,95List price ~~€ 30,75~~

Tormek tts - 100 setting jig turning tools

Technical data of the Tormek TTS - 100 Setting tool Turning tools. This patented wood turn degrees distributor perfect working with wood turn tools. You can use the wood turn divider to precisely determine the angle of your gouges and straight and oval wood turn chisels with a straight or curved angle and then perfect grinding. The degree divider can be used in combination with the gouge accessory SVD-185 and the multi grinding jig SVS-50.

23,95List price ~~€ 31,14~~

Tormek wm - 200 degrees arc

Technical data of the Tormek WM - 200 Degree Arc. The patented Tormek angle meter can be used in two ways. You can set the sharpening tool on the sharpening stone to the desired sharpening angle from 10 ° to 75 ° and measure the existing angle on your tool. The angle meter is suitable for any grindstone from 250 mm (10 ") diameter to 150 mm (6") diameter. The angle meter has two magnets for placement on the machine housing.