Nederlands
Deutsch
français
italiano
Norsk
România
España
Sverige
Shopping basket
No products
Other - Sets Products
-
AOK professional brake line flare set
Easily form 45 degree double, single and pipes in Steel, stainless steel and soft metal pipes. This set contains the dimensions 4.75 mm, 5 mm, 6 mm and 10 mm. All forming molds for fanning the brake are mounted straight on the turret. T-shaped screw clamp holds the line securely in place while forming. This tool pays for itself with the first project and gives you peace of mind knowing that your seam edges have OE precision, quality and safety. Can be mounted on your vice for easy working. All form-retaining molds that you need are mounted straight on the turret, so there is no hassle with small parts.
€ 199,95List price€ 259,94Almost sold out!Delivery time 1 - 3 business days -
AOK professional hydraulic brake line flaring set
This hydraulic brake line seam set is extremely suitable for seaming steel, aluminum, brass and copper and Cunifer pipes. In addition, this set is suitable for making bright edges under the car, so that a complete brake line does not have to be dismantled. The set can therefore be used everywhere because it does not have to be placed in the workboard. The AOK Professional Hydraulic Brake Line Felsset is equipped with a powerful hydraulic system for a precision seam. Even when working on steel pipes, not much force is needed. Why is this an absolute top set? Simple and without much force you make a very neat bright edge. Can also be used under the car. Suitable for the most common pipe sizes. One of the few sets with which steel pipes can be folded. Very competitively priced. The flange set is suitable for the following pipes: 4.75 mm, 5.00 mm, 6.00 mm. Suitable for single and double flanged collars (Konvex and SAE / DIN.) The AOK Professional Hydraulic Brake Line Felsset Hydraulic brake line flange set consists of the following parts: Flange tool with handle, Set screw with hexagon, Hydraulic spindle, Pipe clamp set 4.75mm / 3/16 ", Pipe clamp set 5.00mm, Pipe clamp set 6.00mm, Flange cutter SAE 4.75mm, 5.00mm - OP1, Flange cutter SAE 6.00mm - OP1, Flange cutter SAE 4.75mm, 5.00mm, 6.00mm - OP2 (90 °), Flange cutter DIN 4.75mm, 5.00mm, Flange cutter DIN 6.00 mm The product is supplied in a suitable sturdy storage case with foam.
€ 173,95List price€ 234,83In stockDelivery time 1 - 3 business days -
HBM 10-piece diesel injector tapping set
This extensive tool set is suitable for a wide range of vehicles with a diesel engine, either commercial or for occasional use. The entire set is designed to make the injector seat clean and carbon-free when changing injectors, which also prevents recoil of injectors that are not properly seated. The five different blades are available for almost all diesel cars. They can also be used for re-cutting injector seats when diesel engines are being overhauled or when replacing injectors. They can also help keep the diesel injector seat clean when a new or reconditioned injector is fitted. All tools are made from high-quality materials, which results in easy and clean work. The set consists of the following parts: 1 x 15 mm x 19 mm flat reamer - for universal atomizers / applications, 1 x 17 mm x 17 mm flat reamer - for Delphi / Bosch injectors (BMW / PSA / Renault / Ford), 1 x 17mm x 19mm flat reamer - for Bosch injectors (Mercedes-Benz CDI) 1 x 17mm x 17mm angle reamer - for Mercedes Benz CDI1 x 17mm x 21mm angle reamer - for Fiat / Iveco, 1 x T handle for easy use, 1 x test site, 1 x 6-sided key. The entire set is supplied in a plastic carrying case for easy transport. The HBM 10 Piece Diesel Injector Tapping Set consists of. Flat deburrer # 1: 15mm x 19mm - for universal injectors / applications Flat deburrer # 2: 17mm x 17mm - for Delphi / Bosch injectors (BMW / PSA / Renault / Ford) Flat deburrer # 03:17 mm x 19 mm - for Bosch injectors (Mercedes-Benz CDI) Angled Deburring # 01:17 mm x 17 mm - for Mercedes Benz CDI Angled deburrer # 02:17 mm x 21mm - for Fiat / Iveco
€ 35,95List price€ 46,74In stockDelivery time 1 - 3 business days -
HBM 10-piece microfibre car drying towel, cleaning towel set
The knitted microfibre structure makes this car towel very flexible and easy to handle, moreover the cloth slides very subtly over car paint without compromising on the absorbing capacity. A car towel that you don't want to miss. An excellent absorption capacity with deep glossy, dry cars as a result are not the only strengths of the HBM Microfiber Car Towel. Dirt and fat are also absorbed deep into the microfibers, which also makes it suitable for use as a mega microfibre cloth during general activities. Even when used during the final detailing steps, it stands its ground! High absorption capacity. Ensures clean a deep shine. Absorbs more than 6 times its own weight of moisture. Flexible and easy to handle. Withstands at least 200 machine washings. Dimensions: 40 x 40 cm. INSTRUCTIONS FOR USE / WASHING INSTRUCTIONS: Machine wash before first use. Do not use fabric softener, 3in1 detergent or bleach. 60 ° Celsius recommended. Maximum washing temperature 90 ° Celsius. Choose a low temperature program for machine drying. Do not iron.
€ 4,95List price€ 6,68In stockDelivery time 1 - 3 business days -
HBM 10-piece wheel bearing and gasket mounting set 39.5 - 81 mm
Material Aluminium. |
€ 24,95List price€ 32,44In stockDelivery time 1 - 3 business days -
HBM 12-piece bearing puller set
Range Van 10 tot 100 mm lagerdiameter, maximale ashoogte 40 cm. |Capacity 2 Ton. |
€ 41,95List price€ 50,34In stockDelivery time 1 - 3 business days -
HBM 12-piece chain tool and latch set
Technical data of the HBM 12 Piece Chain punch and latch Set. Suitable for camshaft and drive chains for most light and medium heavy chains (all motorcycles, passenger cars and light vans). For chains with a diameter of or # 35 to # 630. With 3 breakdown pins (thresholds) in 2.2 | 2.9 | 3.8 diameter. Packed in a plastic case. This tool is specially designed to save time when removing and installing motorcycle chains.
€ 17,95List price€ 24,23In stockDelivery time 1 - 3 business days -
HBM 12-piece sump plug socket set
Technical data of the HBM 12-piece Carterplug socket set. This carter plug set is made of high-quality chrome vanadium steel that is very resistant to corrosion by acids and bases. This carterplug socket set consists of a T-bar with sliding piece with a length of 165 mm, seven hex connections and four square head connections. The whole is delivered in a handy transport case. Material: chrome vanadium steel with satin finish. Hex connections: 8 mm, 9 mm, 10 mm, 12 mm, 14 mm, 17 mm + 3/8 ". Square head connections: 8 mm, 11 mm, 13 mm + 3/8 " T-bar with sliding piece with a length of 165 mm.
€ 15,95List price€ 22,33In stockDelivery time 1 - 3 business days -
HBM 12-piece wheel bolt, wheel nut and wheel flange screw thread repair set
Wheel bolt and wheel flange thread repair set. Complete set for re-cutting threads on wheel nuts and wheel bolts. Contains special cutting plate holders, making it possible to use the wheel bolts directly on the vehicle Technical data of the HBM 12 Piece Wheel Bolt, Wheel Nut and Wheel Flange Threaded Repair Kit. Wheel nut thread repair set 12 pieces. Thread cutter and thread cutter set for wheel nuts and bolts. For cutting the thread of nuts and wheel bolts. The cutting plate holders are equipped with a 10 mm (3/8 ") square connection and are suitable for a ratchet. This set contains: Taps: M12x1.25; M12x1.50 and M14x1.5. Cutting plates: M12x1.25; M12x1.50 and M14x1.5, 2 tap holders, 2 cutting plate holders, L key, 12-blade thread meter: 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1, 25 - 1.5 - 1.75 - NPT27 - BSP28.
€ 25,95List price€ 36,33In stockDelivery time 1 - 3 business days -
HBM 13-piece crankshaft pulley puller set
The HBM 13 Piece Crankshaft Pulley puller set is the ideal set to replace crankshaft pulleys, crankshaft dampers. The crankshaft pulley tractor is also suitable for power steering pulley and alternator pulley.
€ 9,95List price€ 10,95In stockDelivery time 1 - 3 business days -
HBM 13-piece professional dent removal set with hammer extractor
Dent removal kit with a 2 kg stroke puller and various adapters for the most common body work. Ideal for example, to pull out fender edges but also useful for double-walled sheet metal, screw a screw in the dent and pull it out. The impact puller can also be used to remove stuck bearings from shafts or from hubs. Technical data of the HBM 9 Piece Dent Removal Set with Stroke Puller. Technical data of the HBM 13 Piece Professional Dent Puller Set with Stroke Puller 2 kg impact puller, sliding tube made entirely of metal. Universal adapters for different purposes.
€ 31,95List price€ 35,15In stockDelivery time 1 - 3 business days -
HBM 13-piece universal brake piston reset set
Technical data of the HBM 13-part Universal Brake Piston Reset Set. This tool set is indispensable if you want to replace your brake pads yourself. The brake piston reset kit is suitable for almost all car makes and consists of 1 tractors (right-hand thread), 1 spacer plate and 11 different adapters. With this tool you can screw in the brake pistons under pressure without risk of damage. The reset set is supplied in a sturdy plastic case and is easy and safe to store and carry. With this brake piston reset set you will be guaranteed to save a lot of costs at the garage. The set consists of 1 spindle (right-hand thread), 1 adjusting plate and 11 adapters.
€ 14,95List price€ 19,44In stockDelivery time 1 - 3 business days -
HBM 14-part vacuum pump for brake fluid - brake bleeder
Changing the brake fluid and bleeding the brake is not an easy job on your own. Fortunately, beautiful tools have been invented for this, such as this brake bleed kit. From now on you can change and bleed your brake system yourself. Connect this set to the bleed nipple of the caliper or brake drum. By first making a vacuum with the hand pump, you can be sure that no air is added when the nipple is opened. By maintaining the vacuum with the pump you pull the brake fluid out of the brake system. The liquid then ends up in the supplied reservoir. Use brake breather for multiple purposes. The set contains various adapter nipples for connection to calipers, but also to other components. The vacuum pump can also be very useful in other situations. When venting is necessary, this pump offers a solution. Consider, for example, venting fuel systems. Certainly when replacing fuel filters of modern diesels, air enters the system quickly. You can easily remove this air by connecting this pump. You will often find the nipple for this on top of the filter housing. Technical data of the HBM 15-part Vacuum Pump for Brake Fluid - Brake Bleeder With this handy vacuum pump you can vacuum brake systems from cars and engines, but also test solenoid valves and under or over pressure valves, for example. With 7 universal adapters With 3 brake nipple adapters 1 collection reservoirs 2 long and 2 short snakes Nice quality switchable hand pump with pressure gauge, also ideal for motorcycle brakes and hydro-clutches This pump has 2 functions. By clicking on / off the knurled ring the pump can be switched between blowing and sucking.
€ 15,95List price€ 22,33In stockDelivery time 1 - 3 business days -
HBM 15-part vacuum pump for brake fluid - brake bleeder
Changing the brake fluid and bleeding the brake is not an easy job on your own. Fortunately, beautiful tools have been invented for this, such as this brake bleed kit. From now on you can change and bleed your brake system yourself. Connect this set to the bleed nipple of the caliper or brake drum. By first making a vacuum with the hand pump, you can be sure that no air is added when the nipple is opened. By maintaining the vacuum with the pump you pull the brake fluid out of the brake system. The liquid then ends up in the supplied reservoir. Use brake breather for multiple purposes. The set contains various adapter nipples for connection to calipers, but also to other components. The vacuum pump can also be very useful in other situations. When venting is necessary, this pump offers a solution. Consider, for example, venting fuel systems. Certainly when replacing fuel filters of modern diesels, air enters the system quickly. You can easily remove this air by connecting this pump. You will often find the nipple for this on top of the filter housing. Technical data of the HBM 15-part Vacuum Pump for Brake Fluid - Brake Bleeder With this handy vacuum pump you can vacuum brake systems from cars and engines, but also test solenoid valves and under or over pressure valves, for example. With 7 universal adapters With 3 brake nipple adapters 1 collection reservoirs 2 long and 2 short snakes Nice quality switchable hand pump with pressure gauge, also ideal for motorcycle brakes and hydro-clutches This pump has 2 functions. By clicking on / off the knurled ring the pump can be switched between blowing and sucking.
€ 20,95List price€ 27,24In stockDelivery time 1 - 3 business days -
HBM 15-piece oil filter disassembly set - oil filter cover set
Technical data of the HBM 15-piece Oil filter Disassembly set - Oil filter Cover. Recording 1/2 " 65 mm. Cap with 14 ridges and 1/2 "connection. 65/67 mm. Cap with 14 ridges and 1/2 "connection. 68 mm. Cap with 14 ridges and 1/2 "connection. 76 mm. Cap with 30 ridges and 1/2 "connection. 74/76 mm. Cap with 14 ridges and 1/2 "connection. 75/77 mm. Hood with 15 ridges and 1/2 "connection. 73 mm. Cap with 14 ridges and 1/2 "connection. 74/76 mm. Hood with 15 ridges and 1/2 "connection. 80 mm. Hood with 15 ridges and 1/2 "connection. 82 mm. Hood with 15 ridges and 1/2 "connection. 90 mm. Hood with 15 ridges and 1/2 "connection. 93 mm. Hood with 15 ridges and 1/2 "connection. 93 mm. Hood with 36 ridges and 1/2 "connection. 100 mm. Hood with 15 ridges and 1/2 "connection. Including gradient from 1/2 to 3/8
€ 25,95List price€ 35,03In stockDelivery time 1 - 3 business days -
HBM 15-piece oil funnel set with 12 adapters
This 15-piece motor oil funnel set is made of high-quality nylon material and is ideal for quickly filling the oil tank of your car without spilling. The handy funnel prevents oil from dripping on the cylinder head, engine block and intake manifold. The angled funnel ensures reach of oil tanks that are difficult to access. The set contains 1 adapter, 1 funnel, 1 angled tube and 12 thread adapters. They are supplied in a molded case for easy storage and transport. Material: nylon Fast oil filling without spilling Designed for vehicles with internal guards or hoods Supplied in a molded case for easy storage and transport Delivery includes: 1 x Funnel 1 x Adapter 1 x Attachment pipe 12 x Thread adapters. Provides a quick oil filling without spilling. Very suitable for many late model cars with internal partitions. 2 liter funnel fits adapters for a wide range of applications. Color-coded adapters for filling opening. Special angular extension with rotating function for hard-to-reach places. Technical data of the HBM 15 Piece Oil Funnel Set With 12 Adapters. Oil filling funnel with various filling adapters with a very wide application range. Easily top up engine oil without spilling. Suitable for most new vehicles. The 2-liter filling funnel fits the 13 different color-coded adapters. A specially curved extension piece with swivel function is supplied for oil fill openings that are difficult to reach. This set contains: 2 liter funnel; Special curved extension to mount the funnel and the adapter; Adapter
€ 38,95List price€ 46,74In stockDelivery time 1 - 3 business days -
HBM 16-piece glow plug puller set 8 - 10 mm.
Technical data of the HBM 16-Piece Glow Plug Extractor set 8 - 10 mm. For 8 and 10 mm glow plugs. Step drill for drilling broken-off glow plugs in 7 x 5.5 mm and 9 x 5.5 mm Thread tapping M8 x 1.0, / M10 x 1.0 / 6.3 (1/4 ") - 28UNF for tapping new threads T-holder for threaded taps with ratchet function E10 cap
€ 49,95List price€ 69,93In stockDelivery time 1 - 3 business days -
HBM 16-piece wire repair set for spark plugs
Size M14. Thread inserts in 3 lengths; 11, 16 and 19 mm, of 5 pieces each. Thread inserts are special buses, not helicoils. Wall thickness of the buses is small so that they do not take up too much space in the cylinder head. 1 threaded drill / after cutter M14 in thread HSS-G 5 threaded sleeve 11 mm black. tool 5 threaded sleeve 16 mm black 5 threaded sleeve 19 mm clear galvanized You can use this set to repair damaged spark plug thread in the cylinder head, the insert often produces a stronger thread than the original. Repair set Thread repair set spark plugs Technical data of the HBM 16 Piece Thread repair set for spark plugs. 5 threaded sleeves M14 x 11 mm. 5 threaded sleeves M14 x 16 mm. 5 threaded sleeves M14 x 19 mm. 1 HSS-G Tap for M14, 16 mm pt.
€ 19,95List price€ 25,94In stockDelivery time 1 - 3 business days
