Lighting and lamps Products

HBM 120 led's rechargeable hood lamp

Charging time 4-5 uur |Burning time Ongeveer 1.5 uur werklicht. |

HBM magnetic base with 230 volt LED lighting

Total length 60 cm. |

HBM LED lamp on magnetic base

The HBM LED Lamp on magnetic base is a handy and powerful lamp that can easily be attached to metal surfaces thanks to the strong magnetic base. With its 3 bright LEDs, this lamp provides sufficient light to work in dark spaces. The flexible arm ensures optimal direction of the light, while the compact dimensions make the lamp easy to place. Technical data Number of LEDs: 3 Magnetic base diameter: 65 mm Length Flexible part: 120 mm Total Height: 260mm Whether you are tinkering with your car, diving into a cupboard or simply need extra light in a dark place, the HBM LED Lamp on a magnetic base is the ideal companion. Order today and take advantage of its convenient functionality!

HBM headlight polishing set complete

(1)

The HBM Headlight Polishing Set Complete is designed to eliminate the worst cases of headlight chipping, yellowing, oxidation and scratches from your headlights. It includes everything needed to repair the most cloudy or sun damaged lenses. Get good results on most plastic lenses, such as headlights, taillights, trailers, boat windows, helmet visors, motorcycle windows and more. Professional results can be produced with this easy-to-use kit at a fraction of the cost. Technical data of the HBM Headlight Polishing Set Complete: HBM Headlight Repair Kit for removing scratches, dull spots and discoloration from headlights Make the car's headlights look like new again, so you benefit from optimal light output for better visibility of the road Can be applied to plastic surfaces To repair weathered and dull headlights: This repair kit contains all products to completely restore weathered, dull and yellowed headlights and restore them to new condition. After the treatment, the headlights look like new again. The headlight does not have to be removed from the car for the treatment, making it easy to do it yourself. Also for other plastic surfaces: This headlight repair kit can also be used on other plastic surfaces, such as boat windows, helmet visors, windshields, taillights and trailer lights. How do I use this Headlight Repair Kit: Clean the surface: Clean the plastic of the headlight with water. Tape off the area around the lens to avoid scratching painted surfaces. Sanding the headlight: Use sanding discs from coarse to fine (P800, P1200, P2000) to completely remove yellowing, tarnish and rust. Polish the headlight: Apply the polishing paste to the polishing wheel and polish the lens until the shine is restored. Protect the headlight: Apply the protective fluid to the lens and let it dry in direct sunlight. Benefits of this DIY Headlight Repair Kit: This do-it-yourself headlight repair kit allows you to easily and quickly repair your car's headlights. This makes the car headlights bright and clear again, which contributes to safety on the road. This set is intended to repair 2 headlights.

RELED Ceiling lamp LED 17W, 3000K

LED Ceiling lamp, 17W Special characteristics LED Ceiling lamp Power: 17 Watt Light intensity: 1300 lumens Light color: 3000K Size: 305 x 84 mm Protection: IP54 Material: plastic Specifications: Item number: RELED818760 Barcode: 8718309818760 Brand: RELED Net weight (kg): 0.82 Beam angle: Unshielded / diffuse Housing color: White Light color: White Color temperature: 3000 - 3000 K. Cover luminaire with thermal insulation material possible: No. Degree of protection (IP): IP54 Dimmable 0-10 V: No. Dimmable 1-10 V: No. Dimmable DALI: No. Dimmable DMX: No. Dimmable DSI: No. Dimmable GPRS: No. Dimmable LineSwitch: No. Dimmable mains voltage modulation: No. Manufacturer specific dimming: No. Dimmable trailing edge: No. Dimmable leading edge: No. Dimmable with potentiometer (integrated): No. Programmable dimming: No. Dimmable RF: No. Dimmable Sine Wave Reduction: No. Dimmable Touch and Dim: No. Dimmable with push-button: No. Dimmable Zigbee: No. Emergency power supply integrated: No. 239; Energy efficiency: 235; nce class of the built-in lamp: A ++, A +, A (LED) Height / depth: 84 mm Lamp type: LED not exchangeable Length: 305 mm Light diffuser: None Light emission: Direct Light distribution: Symmetrical Cover material: Plastic opal Housing material: Plastic Max. system power: 17 W. Not dimmable: Yes Nom. voltage: 220 - 250 V. Control via Bluetooth: No. Protection class: II Effective luminous flux according to IEC 62722-2-1: 1300 lm Suitable for flush mounting: No. Suitable for ceiling mounting: Yes Suitable for emergency lighting: No. Suitable for light line configuration: No. Suitable for surface mounting: Yes Suitable for pendant suspension: No. Suitable for wall mounting: Yes Suitable for VDU workshop according to EN 12464-1: No. Housing surface protection: None (untreated) Ballast: LED control current controlled Grid version: None Voltage type: AC Width: 305 mm With air slots: No. Ballast included: Yes With light sensor: No. With light source: Yes With motion sensor: No.

HBM magnetic base with 230 volt power LED lighting

(2)

HBM Magnetic base with 230 Volt Power LED lighting Brand: HBM The HBM Magnetic Base with 230 Volt Power LED lighting is equipped with three powerful LED lamps and is adjustable by means of a flexible arm. This magnetic base is ideal for use in your workshop or garage. Other specifications: Equipped with three powerful LED lamps Adjustable by means of a flexible arm Technical data: Total length: 600 mm Voltage: 230 Volts Watts: 3 Watts Length of the cord: 150 cm Head diameter: 50 mm Dimensions of the magnetic base: 58 x 53 x 50 mm Length of the cord: 100 cm With the HBM Magnetic Base with 230 Volt Power LED lighting you always have sufficient light at hand during your work. Order it now and benefit from the many benefits!

HBM stroboscope timing lamp for ignition

With the HBM Stroboscope timing lamp for Ignition you can perfectly adjust the ignition of your vehicle. It is essential for correct ignition timing adjustment. Benefits of correct ignition adjustment A smooth running engine Good performances Low consumption No chance of burnt valves The HBM Stroboscope timing lamp for Ignition is a reliable and effective tool that helps you adjust the ignition. It is easy to use and has a bright and clear screen. Features of the HBM Stroboscope timing lamp for Ignition: Professional quality Suitable for all vehicles with a petrol engine Easy to use Bright and clear screen Compact size In short, the HBM Ignition Strobe Timing Lamp is a must-have for anyone who is serious about adjusting their vehicle's ignition. Don't hesitate and order today!

HBM 615 mm. flexible gripper with magnet and LED lamp

With the HBM 615 mm. Flexible Gripper with Magnet and LED Lamp, you have a handy tool for various jobs. Thanks to the flexible 600 mm arm, you can easily reach hard-to-reach places. The gripper is equipped with a strong magnet and a bright LED lamp, giving you an even better view of what you want to grab. The grab is made of durable aluminum and is suitable for various purposes. Total length 600 mm Equipped with magnet and LED lamp Made from aluminum This HBM Flexible Gripper makes every task a lot easier. Order it today and experience the convenience!

Scangrip Flashlight Flash 1000 R 1000lm

(1)

The Scangrip work lamp and flashlight Flash 1000R is a design of exceptional quality especially for the professional user. With a significantly improved light output, compact design and even more functionality, this work lamp is a real must-have in the workshop. Focus function and Boost mode Adjustable beam angle from 10° to 60° Reaches up to 250 meters Magnetic on/off switch with boost mode increases the light output from 500 to 1000 lumens Boost mode is activated by pressing and holding the power switch for 2 seconds Flashlight automatically switches to normal mode after 60 seconds Practical and Stylish Comes with a clip-on holster so you can carry the lamp close by Made of anodized aluminum for high durability and an ergonomic and secure grip Rechargeable with included USB cable Includes wrist strap for extra grip and safety Waterproof and Durable Protection factor IP54 Can take a beating, for an optimal work light that lasts a long time Specifications Dimensions (LxWxH): 42x42x196 mm Weight: 350 grams In the box: flashlight, clip-on holster, USB cable, wrist strap and manual

HBM professional LED machine lamp

Voltage 230 Volt. |Watt 12. |Length arms 200 x 250 mm. |Total number of LEDs 12. |Dimensions of the foot 65 x 65 mm. |Dimensions of the lamp housing 110 mm. Rond en 130 mm. Diep. |

HBM 225 mm wall and ceiling sander - 750 watt with LED lamp

Net weight (kg) 4,5 |Dimensions width 270 mm |Dimensions height 260 mm |Dimensions length 1200 - 1700 mm |Sanding disc Ø 225 mm ( Klittenband opname ) |Engine power 230 Volt |Power 750 W |Rpm 700 - 1700 tr/min |

HBM 700 gram hand pick up magnet with flexible shaft and LED lighting

Maximum capacity of the magnet 700 Gram. |Total length 570 mm. |

Paulmann TriLED cabinet lighting with magnetic contact

(1)

The TriLED cupboard lamp switches on by means of a magnetic contact when you open the cupboard door and off again when you close the door. Easy mounting by means of adhesive pads. Specifications: Article number: 70500 Barcode: 4000870705001 Brand: PAULMANN Net weight (kg): 0.087 Housing color: Aluminum Light color: White Conductor cross-section: 0 mm &: 178; Connection method: Screw terminal Cover luminaire with thermal insulation material possible: Yes Degree of protection (IP): Other Degree of protection (NEMA): Other Diameter: 0 mm Dimmable 0-10 V: No. Dimmable 1-10 V: No. Dimmable DALI: No. Dimmable DMX: No. Dimmable DSI: No. Dimmable GPRS: No. Dimmable LineSwitch: No. Dimmable mains voltage modulation: No. Manufacturer specific dimming: No. Dimmable trailing edge: No. Dimmable leading edge: No. Dimmable with potentiometer (integrated): No. Programmable dimming: No. Dimmable RF: No. Dimmable Sine Wave Reduction: No. Dimmable Touch and Dim: No. Dimmable with push-button: No. Dimmable Zigbee: No. Electrical connection with connector system: No. Energy efficiency: 235; nce class of the built-in lamp: Other Height / depth: 65 mm Lamp holder: None Lamp type: Other Length: 24 mm Lighting fixture with limited surface temperature "D-mark": No. Material: Other Max. system power: 0 W. Not dimmable: No. Number of poles: 2 Protection class: III Effective luminous flux according to IEC 62722-2-1: 0 lm Suitable for emergency lighting: No. Suitable for number of lamps: 2 Ballast: Not necessary Voltage type: DC Width: 66 mm Ballast included: No. With light source: Yes With motion sensor: No. With switch: Yes Instruction manual:

HBM adjustable magnifying lamp with LED lighting, table model

Diameter of the lens 125 mm. |Magnification 3 X. |Voltage 230 Volt. |Wattage 7 Watt. ( 90 LEDS ) |Lifespan of the LEDS 20.000 uur. |Brightness 1000 Lux. |

HBM LED adjustable magnifying lamp with dimmer and table clamp - 3800lux

Diameter of the lens 127 mm. |Magnification 3 X. |Voltage 230 Volt. |Wattage 8 Watt. ( 81 LEDS ) |Lifespan of the LEDS 25.000 uur. |Brightness 3800 Lux. |

Scangrip Construction lamp Vega Lite 6000lm

(1)

The VEGA LITE is part of a series of three innovative, robust, lightweight LED floodlights for the professional market, providing high quality lighting for a variety of indoor and outdoor areas. Compared to the previous version, the light output of the upgraded VEGA LITE has been increased from 4000 lumens to 6000 lumens. The powerful LEDs provide a diffused and pleasant, glare-free, uniform work light, with a large dispersion. With great design, performance and durability, the new VEGA LITE offers a strong light output and high quality at an attractive price. The robust housing of the VEGA LITE is made of a highly impact-resistant plastic material, perfect for a working environment. Since the LEDs do not produce any heat, there is no risk of fire when using the floodlight. The VEGA LITE comes with an integrated carrying handle and a stand for direct mounting of the lamp on the SCANGRIP TRIPOD. Two built-in sockets on the back make it possible to add more lamps or other equipment without using extra cabling - quickly and easily. 4 reasons to choose the VEGA LITE floodlights Powerful, diffused, glare-free lighting Durable housing made of highly impact-resistant plastic Powerful lighting - up to 6000 lumens Minimal heat generation compared to traditional halogen worklights Specifications: Item number: 03.5453 Barcode: 5708997354537 Brand: SCANGRIP Net weight (kg): 3.9 Built-in charging circuit: Yes Light color: Cold white Color Rendering Index: 80-89 Color temperature: 0 - 6000 K Conductor cross section: 3 mm&: 178; Degree of Protection (IP): IP54 Depth: 117mm With tripod: Yes Impact resistance: IK07 Lampholder: LED(integrated) Lamp type: LED not replaceable Length: 310mm Connection cable length: 5 m Max. system power: 48 W Version: Construction lamp nom. voltage: 100 - 240 V Control via app: No Luminous efficacy according to IEC 62722-2-1: 6000 lm Rechargeable: No Response brightness: 0 - 8500 lx Width: 318mm With light source: Yes With protection: No With tripod holder: No With wheels: No Color standard: Gray Housing colour: Gray Housing material: Metal/plastic Logo 1: Certificate: Presentation document/presentation file: Energy label: Instruction manual:

HBM rechargeable LED work lamp with 60 LEDs

Number of LEDs 60 Stuks |Charging time 1.5 uur |Length 370 mm |Width 35 mm |

HBM professional rechargeable led flashlight 280 lumens model 1

(2)

Watt 3. |Lumen 280. |Total length 220 mm. |Dimensions Cup 120 x 35 x 50 mm. |

HBM professional rechargeable extra narrow LED flashlight 300 lumens

Watt 3. |Lumen 300. |Total length 360 mm. |Extra flat head 200 x 22,5 x 10 mm. |

HBM 300 Lumen Professional Foldable and Rechargeable LED Lamp with Hook and Magnet

This foldable LED lamp from the HBM brand is the ideal solution for illuminating any workplace. The lamp is easy to carry and folds out into a small desk lamp with an elongated LED array. The very bright and diffuse white light, with a color temperature of 4900 Kelvin (warm daylight), illuminates a large area and can be rotated through an angle of 220°. Product features: Stable to place on any surface Fold-out hook to hang the lamp Strong magnet on the bottom to securely attach the lamp to any steel surface Adjustable/tiltable up to 220 degrees Burning time approx. 3 hours Charging time approx. 3-4 hours Super bright thanks to the 300 Lumen POWER LED Extra flat and easy to carry Includes USB cord and adapter The foldable LED lamp is equipped with a strong Li-ion battery and can also be powered by the adapter. This makes it the ideal travel lamp for a camper or caravan, the LED desk lamp for a work table at a job location, or a magnetic LED lamp for when you are tinkering with the car! Technical specifications: 3Watt COB LED on the front 300 Lumen POWER LED Equipped with a strong magnetic back Equipped with hanging hook Equipped with rechargeable Li-ion battery The HBM 300 Lumen Professional Foldable and Rechargeable LED Lamp is the perfect solution for bright and versatile lighting in any workplace.

HBM professional LED aluminum mini flashlight with magnetic base 400 lumens

Diameter 22,5 - 27,5 mm. |Batteries 3 x AA. |Led 2 kleuren Powerled. |Lumen 400!! |Material Aluminium. |

HBM mini LED flashlight 90 lumens

Length 85 mm. |Diameter 25 mm. |Batteries 3 x AAA. |Led Powerled. |Lumen 90. |Material Aluminium. |

HBM 450 lumen professional foldable and rechargeable LED lamp with 3 functions and magnet

(1)

Battery type Li-ion 18650 - 3,7 Volt - 2600MAH. |Extra flat head 150 x 20 x 6 mm. |Dimensions open 355 x 53 mm. |

HBM Professional Rechargeable Headlamp 480 Lumen, 3 Functions, From 10 to 100% Dimmable With Movement

Technical data of the HBM Professional Rechargeable Headlamp Weight 91 grams Lumen 480 Other specifications Motion sensor Fully dimmable 60 degrees rotatable Water resistant Shockproof 2.5 hours charging time, 3 hours usable

RELED Work lamp Rechargeable 60 LED

The RELED Work Light Rechargeable 60 LED is a handy compact lamp that is suitable for both work and walking lighting. With no fewer than 60 LEDs and a rechargeable battery, this work light is an absolute must-have for every handyman. Special characteristics 60x LED Work/Walking Lamp Rechargeable Battery: 7.2V 800 MAH Ni-MH Burning time: 3 hours AC/DC and 12V charger Equipped with magnet Equipped with hanging hook Specifications Article number: RE814021 Barcode: 8718309814021 Brand: RELED Net weight (kg): 0.66 Flashing light function headlamp: No Built-in charging circuit: No Housing color: Black Color temperature: 3000 - 3000 K Energy efficiency class of the built-in lamp: A++, A+, A (LED) Height/depth: 60 mm Length: 450mm Headlamp: LED not interchangeable Housing material: Plastic Nom. voltage: 220 - 250 V Protection class: II Effective luminous flux according to IEC 62722-2-1: 60 lm Rechargeable: Yes Suitable for emergency lighting: No Voltage type: AC/DC Width: 110mm With light source: Yes In short, the RELED Work Light Rechargeable 60 LED is a top quality product, perfect for every handyman. Order now and increase your productivity!

HBM 180 mm wall and ceiling sander - 750 watt with LED lamp

Mains voltage 230 Volt. |Mains frequency 50 Hz. |Power 750 Watt. |No-load speed 1500-3000 min-1. |Number of positions 6. |Sanding disc diameter 180 mm. |Cord length 4 Meter. |

HBM 8 LED mini flashlight with magnetic base

Length 160 mm. |Diameter 15 - 30 mm. |Batteries 3 x AAA. |Led 8 Leds. |Lumen 22. |Material Plastic. |

HBM LED Fixtures

HBM LED fluorescent fixture for the ceiling. This LED ceiling lamp is ideal for halls and garages. Technical data of the HBM LED Fixture 40W 4000LM L1140 mm. Power 40 Watts. Protection IP65. Brightness 4000 Lumens. Material Plastic. Subcategory Indoor fixtures. Dimension width 60mm. Dimension depth 66mm. Dimension length 1140mm. Technical data of the HBM LED Fixture 24W 2000LM L11480 mm. Power 24 Watts. Protection IP65. Brightness 2000 Lumens. Material Plastic. Subcategory Indoor fixtures. Dimension width 60mm. Dimension depth 66mm. Dimension length 1140mm. Technical data of the HBM LED Fixture 18W 1500LM L580 mm. Power 18 Watts. Protection IP65. Brightness 1500 Lumens. Material Plastic. Subcategory Indoor fixtures. Dimension width 60mm. Dimension depth 66mm. Dimension length 580mm.

Scheppach Battery Work Light 20V C-WL20-X

Scheppach battery work light C-WL20-X delivers a maximum of 300 lumens of light output. This ensures bright and even work light in the dark, at poorly lit workplaces, at the campsite or in the car. The head of the lamp can be rotated 270° and tilted 180° in 6 steps. This always guarantees optimum lighting. The lamp can be hung on many objects with the integrated mounting hook. All batteries and chargers from the Scheppach IXES 20 Volt series can be combined with this work light. The battery and charger are not included but available separately. Powerful rechargeable work light with bright, evenly distributed work light Practical 2-in-1 function; pole and headlight lighting Wireless working; all batteries and chargers from the IXES range can be combined with this wireless work light Luminous flux up to 300 lumens Light head 270° rotatable and 180° tiltable in 6 steps Depending on use, up to 16 hours of lighting possible Integrated mounting hook Ergonomic and compact design

Harlingen Industrial Loupe With LED Lighting

A magnifying glass or eye loupe is a useful tool in many situations and workplaces. With this Harlingen loupe you always have high-quality magnification material at hand. This loupe is easy to hold, magnifies up to 10x and has built-in LED lighting. The loupe comes with a handy storage pouch. Product specifications Lens diameter 30mm magnification 10x Relief 8 LEDs Min. graduation 0.1mm Number of scaling options 13 Dimensions 52x42mm