Bench Screws and Anvils

159,94List price ~~€ 207,92~~

Bernardo BMO150 drill clamp with prism jaws

Specifications: Article number: 28-2009 Barcode: 9009468030162 Brand: BERNARDO Net weight (kg): 7.7 Logo 2:

black steel pipe clamp / vises

65,48

black steel professional steel vises with pipe clamp

41,95

66,95List price ~~€ 93,73~~

Gutster Baby Bar 762mm with nail puller

ANGLE - Perfectly angled for use above and on the floor - particularly effective for tearing down old ceilings and demolishing floorboards etc. NAIL PULLER - Nail puller at the back of the head makes it possible to remove nails from floors and ceilings with ease. HANDLE - NEW extra strong oval shaped handle design - stronger and lighter. Short length for working in tight spaces POINTED HEAD - NEW extra strong, lightweight welded head. Spear-shaped tips to get under the floor and behind the ceiling. Also great for piercing plasterboard. Specifications: Item number: GB04 Barcode: 0860004266525 Brand: GUTSTER Net weight (kg): 2.75 Length: 762 mm Material: Steel Two-component version: 2 Weight: 2.2 gr / kg

HBM 150 mm aluminum top jaws with fiber

Magnetic jaws coated with fiber.

10,95

172,95List price ~~€ 242,13~~

HBM 2.5 x 300 mm. plate roller for the vice

Maximum working width 300 mm. |Maximum rolling capacity over the entire working width 2,5 mm. |Diameter of the rollers 32 mm. |

20,95List price ~~€ 25,14~~

HBM 3 kilogram anvil on foot

Total weight 3 Kg. |Total height 130 mm. |Base diameter 125 mm. |

5,95List price ~~€ 7,74~~

HBM 40 mm. vice with table clamp

Jaw width 40 mm. |Maximum opening of the pelvis 50 mm. |Maximum opening of the table clamp 30 mm. |

7,95List price ~~€ 10,73~~

HBM 50 mm Vice with Swivel Base Onder

Compact vise for do-it-yourselfers and model makers for use in light jobs. Made from high quality iron. The bench vice has an enamelled finish with a chrome handle + screw. The HBM Vices with swivel base are supplied as standard. Rotatable and lockable base.

11,95List price ~~€ 14,34~~

HBM 60 mm vice with table clamp

Jaw width 50 mm. |Maximum opening of the pelvis 60 mm. |Maximum opening of the table clamp 50 mm. |

6,95List price ~~€ 9,04~~

HBM 60 mm Vice with table clamp

Technical data of the HBM 60 mm Vice with table clamp. jaw width 60mm. Maximum opening 35mm. Maximum insertion depth 25mm. Maximum reach table clamp 25mm.

10,95List price ~~€ 12,05~~

HBM 75 mm. steel and nylon anvil in rubber holder

Technical data of the HBM 75 mm. Steel and Nylon Anvil in Rubber Holder. Size Steel anvil 75 x 16 mm. Size Nylon anvil 75 x 16 mm. Size Rubber foot 100 x 30 mm.

20,95List price ~~€ 25,14~~

HBM 75 mm. table vise

Jaw width 75 mm. |

HBM aluminum top jaws for the vice

Magnetic jaws.

HBM aluminum top jaws with double f

Magnetic jaws with a horizontal and vertical V in the jaws.

9,95

HBM aluminum top jaws with felt

Magnetic pelvis covered with felt.

HBM aluminum top jaws with rubber

Magnetic jaws covered with rubber.

HBM Aluminum Top Jaws with Rubber for Extra Grip For in the bench vice

HBM Aluminum magnetic top jaws with Rubber clamping surface for in the vice. These aluminum magnetic top jaws are provided with rubber clamping surfaces in which grooves have been made. These grooves not only provide more grip, but also the possibility to clamp round or polygonal objects. The magnets are milled into the rear of these jaws and consist of iron oxide magnetic strips (iron oxide powder mixed with rubber). . These magnetic strips have the advantage that they are not brittle or fragile (unlike rare-earth or neodymium magnets). As a result, these magnets can never lose small splinters, which can then end up between your machine clamp (or vice) and the top jaw, causing them to no longer connect properly. The magnetic force of these iron oxide rubber strip magnets , is also such that the top jaws are properly pulled towards the clamp (or vice) without magnetizing your workpiece. These magnetic top jaws are available in the following widths: 100 mm - Item no. 9890. 125 mm - Item no. 9891. 150 mm - Item no. 9892.

52,95List price ~~€ 68,84~~

HBM anvil with 4 interchangeable heads

Sizes of the small horn with steps 8 - 10 - 11 - 12,5 - 14 -15,5 mm. |Sizes of the small horn with steps 10 - 12,5 - 15,5 - 19 - 2 -25 mm. |

HBM folding jaws for in the vice

Technical data of the HBM Zetbek for the vice. Magnetic jaws for the vice. For setting sheet steel up to 3 mm. fat.

26,95

10,95List price ~~€ 12,05~~

HBM hand anvil

Sizes 100 x 100 x 35 mm. |

3,95List price ~~€ 5,53~~

HBM hand vise model 2

Jaw width 27,5 mm. |Maximum opening of the pelvis 20 mm. |Total length 170 mm. |

4,95List price ~~€ 5,45~~

HBM hand vise model 4

Jaw width 8 mm. |Maximum opening of the pelvis 2,5 mm. |Total length 130 mm. |

HBM professional long glue clamp / t-clamp

Long Glue clamp - T - clamp with painted finish. Cast iron heads and feet. For applying high pressure. Technical data of the HBM Professional Long Glue Clamp / T-Clamp These clamps are available in 3 different lengths Maximum clamping capacity 410/770/1070/1370/1670 mm.

13,95

10,95List price ~~€ 12,05~~

HBM professional mini anvil

Dimensions 112,5 x 30 x 42,5 mm. |

146,95List price ~~€ 176,34~~

HBM superjaws portable clamping system - vice

Powerful 1000 kg clamping force for a controlled clamping pressure. Reversible sliding jaw provides an extra wide 956 mm clamping capacity. The foot-operated clamping system keeps both hands free for complete control over the workpiece. Extra wide tripod ensures maximum stability. Strong steel construction with powder coating for a long service life. Technical data of the HBM Superjaws Portable Clamping System - Vise Stable but compact chassis Clamps materials up to 956 mm wide Clamp is operated by foot pedal Clamping force up to 1000 kg Dimensions folded: 275 x 775 x 295 mm Dimensions expanded: 980 x 1000 x 860 mm Weight 16 kg