HBM universal metal bender on base
If you work a lot with metal bars, this strong bend is a must have in your garage. You determine the thickness of the bend entirely yourself by the six handy curves supplied. The bar bender can make curves up to an angle of 180 degrees. The maximum thickness of the metal that this powerhouse can bend is 16 mm. You can neatly store the curves again by placing them on the mounting rack attached to the device. Assembling and dismantling the bending device is also a piece of cake. The lifting arch and bending pieces are fixed with extra thick locking pins.
The metal bender is easy to attach through the four predrilled holes in the base. When the bender stands firm, you can show how strong you are. The lever can be adjusted to two different positions up to 113.5 cm long. This means that a great deal of power can be exerted without applying much power yourself. This crimping bender is especially suitable for metal objects with a flat side such as bars. Not suitable for pipes.
The crimping bender is a maximum of 145 cm long and 25.5 cm wide. The steel worker has an ergonomic working height of 98 cm. When the lever has been dismantled, the bar bender has a length of only 33 cm. The bending pieces supplied have the following slide dimensions: 1 ", 1-¼", 1-½ ", 1-¾", 2 ", 2-½" and 3 ".
Buying The HBM universal metal bender on base is extremely easy at Toolsidee. You only need to add the product HBM universal metal bender on base to the shopping cart and click on checkout. All our products have a minimum factory warranty of 1 year (unless stated otherwise above). Do you have any questions about the HBM universal metal bender on base it is always possible to e-mail or call us. You can do this at our contact page. On this page you will also find information about sending the product back.
Article number: 813-E
write a review
You help others with their choice by sharing your experience.