Nederlands
Deutsch
français
italiano
Norsk
România
España
Sverige
Shopping basket
No products
HBM front wheel clamp type 2
HBM front wheel clamp type 2
€ 64,95
(Inc. 21% VAT - explanation)
Delivery time: 1 - 3 business days (also Saturday)
-
Cooling-off period: 14 working days
-
All products at least 1 year warranty
-
Fast shipping throughout Europe!
-
Customer rating
- Description
Handy universal front wheel center with rubber rim protection.
. Raised version that can be mounted on any surface.
Technical data of the HBM front wheel clamp Type 2.
Buying The HBM front wheel clamp type 2 is extremely easy at Toolsidee. You only need to add the product HBM front wheel clamp type 2 to the shopping cart and click on checkout. All our products have a minimum factory warranty of 1 year (unless stated otherwise above). Do you have any questions about the HBM front wheel clamp type 2 it is always possible to e-mail or call us. You can do this at our contact page. On this page you will also find information about sending the product back.
Article number: 1395-E
write a review
You help others with their choice by sharing your experience.
Visitors also bought
-
HBM deluxe motorcycle tire balancing device with adjustable legs
Technical data of the HBM Deluxe Motorbike Tire Balancing Device with Adjustable Legs. The motorcycle tire balancing device with adjustable legs and spirit level is used for balancing motorcycle tires. The balancing device for motorcycle tires is supplied with a shaft and clamp cones set. The clamping cones have a conical shape, so that the motorcycle tire is always centered in the middle. That is handy and effective! With the motorcycle tire balancing device you quickly learn where the motorcycle tire is heavier and where not (out of balance). Set the balancing device. If you first place the balancing device on a flat surface, if this is not the case, the balancing device can be adjusted by means of legs. By means of the spirit level you can immediately see whether the device is standing or not. Then slide the axle through the rim and tighten the clamping cones (3 mm Allen key, not supplied). Once the clamping cones are tightened, place the axle with the motor tire attached on it on the balancer. With a slight twist on the motorcycle tire you will soon learn that the tire is not balanced or well balanced. The heavy part of the motorcycle tire will go down and the light up. You adjust the light part with adhesive lead. Tip, first glue the lead with adhesive tape or tape. The adhesive tape adheres well to the rims, this saves you a lot of effort and money. Once the correct weight has been found, stick the adhesive sheet on.
€ 71,95List price€ 100,73In stockDelivery time 1 - 3 business days -
HBM motorcycle entry wheel clamp model 1 -black
Assembled dimensions 61 x 51 x 35 cm |
€ 61,95List price€ 74,34In stockDelivery time 1 - 3 business days -
HBM motorcycle ride-in wheel clamp model 2
Assembled dimensions 69 x 52 x 35 cm |
€ 72,95List price€ 102,13In stockDelivery time 1 - 3 business days -
HBM professional gp paddock stand for the rear wheel
Dimensions 55 x 40 x 35 cm. |Capacity 250 kg. |
€ 51,95List price€ 57,15In stockDelivery time 1 - 3 business days -
HBM universal mobile motorcycle lift
Maximum lifting capacity 500 Kg. |
€ 125,95List price€ 163,74In stockDelivery time 1 - 3 business days -
HBM 50 motor lift table
Dimensions of the lifting platform 41 x 35 cm. |Maximum lifting capacity 135 Kg. |Minimum height 35 cm. |Maximum height 90 cm. |
€ 334,70List price€ 451,85
In stockDelivery time 1 - 4 business days -
HBM 400 quad, trike motorcycle lift table
Table dimensions including ramp 265 x 120 cm. |Table dimensions without ramp 200 x 120 cm. |Maximum lifting capacity 700 Kg. |Minimum height 15 cm. |Maximum height 85 cm. |
€ 1039,70List price€ 1403,60
In stockDelivery time 1 - 4 business days -
HBM paddock stand for the rear wheel
Dimensions 64 x 44 x 32 cm. |Suitable for wheels with a width Van 20 tot 27 cm. ( Hart tot Hart ) |Maximum capacity 200 Kg. |Dimensions 64 x 50 x 36 cm. |
€ 250,70List price€ 300,84
In stockDelivery time 1 - 4 business days -
HBM motorcycle in-wheel clamp model 1
Assembled dimensions 61 x 51 x 35 cm |
€ 59,95List price€ 71,94In stockDelivery time 1 - 3 business days -
HBM 400 quad, trike motorcycle lift table - black
Table dimensions including ramp 265 x 120 cm. |Table dimensions without ramp 200 x 120 cm. |Maximum lifting capacity 700 Kg. |Minimum height 15 cm. |Maximum height 85 cm. |
€ 1039,70List price€ 1455,58
In stockDelivery time 1 - 4 business days -
HBM motorcycle tire balancing device with adjustable legs
Technical data of the HBM Motorcycle Tire Balancing Device with Adjustable Legs. The motorcycle tire balancing device with adjustable legs and spirit level is used for balancing motorcycle tires. The balancing device for motorcycle tires is supplied with a shaft and clamp cones set. The clamping cones have a conical shape, so that the motorcycle tire is always centered in the middle. That is handy and effective! With the motorcycle tire balancing device you quickly learn where the motorcycle tire is heavier and where not (out of balance). Set the balancing device. If you first place the balancing device on a flat surface, if this is not the case, the balancing device can be adjusted by means of legs. By means of the spirit level you can immediately see whether the device is standing or not. Then slide the axle through the rim and tighten the clamping cones (3 mm Allen key, not supplied). Once the clamping cones are tightened, place the axle with the motor tire attached on it on the balancer. With a slight twist on the motorcycle tire you will soon learn that the tire is not balanced or well balanced. The heavy part of the motorcycle tire will go down and the light up. You adjust the light part with adhesive lead. Tip, first glue the lead with adhesive tape or tape. The adhesive tape adheres well to the rims, this saves you a lot of effort and money. Once the correct weight has been found, stick the adhesive sheet on.
€ 41,95List price€ 50,34In stockDelivery time 1 - 3 business days -
HBM paddock stand for the front wheel
Dimensions 64 x 44 x 32 cm. |Suitable for wheels with a width Van 20 tot 28 cm. ( Hart tot Hart ) |Maximum capacity 100 Kg. |
€ 244,70List price€ 269,17
In stockDelivery time 1 - 4 business days
Related products
-
HBM front wheel clamp type 2
Handy universal front wheel center with rubber rim protection. . Raised version that can be mounted on any surface. Technical data of the HBM front wheel clamp Type 2. Packaging dimensions 46 x 36 x 15 cm. Weight Ca. 12 kg.
€ 64,95List price€ 87,68In stockDelivery time 1 - 3 business days
Last viewed products
-
HBM front wheel clamp type 2
Handy universal front wheel center with rubber rim protection. . Raised version that can be mounted on any surface. Technical data of the HBM front wheel clamp Type 2. Packaging dimensions 46 x 36 x 15 cm. Weight Ca. 12 kg.
€ 64,95List price€ 87,68In stockDelivery time 1 - 3 business days
