AOK car tire valve maintenance set
AOK car tire valve maintenance set
Delivery time: 1 - 3 business days (also Saturday)
Cooling-off period: 14 working days
All products at least 1 year warranty
Fast shipping throughout Europe!

- Description
Technical data of the AOK Car Tire Valve Maintenance Set
Buying The AOK car tire valve maintenance set is extremely easy at Toolsidee. You only need to add the product AOK car tire valve maintenance set to the shopping cart and click on checkout. All our products have a minimum factory warranty of 1 year (unless stated otherwise above). Do you have any questions about the AOK car tire valve maintenance set it is always possible to e-mail or call us. You can do this at our contact page. On this page you will also find information about sending the product back.
Article number: 2920-E
write a review
You help others with their choice by sharing your experience.
-
gaither tire fitting paste, tire grease white 5 kg
With this tire grease it is easier to spoon the tire over the rim when the tire is placed on it with tire scoops. Tire grease is a specially developed grease that provides short-term sliding properties when the grease is applied with a buckwheel / brush. The tire grease will dry out after a short period so that the tire will not rotate relative to the rim. This tire grease leaves no grease residue after drying. This tire grease is suitable for run flat tires.
€ 14,95List price€ 19,44In stockDelivery time 1 - 3 business days -
HBM digital tire profile meter
Technical data of the HBM Digital Tire Profile Meter Min. range 0.01 mm Max range 25.4 mm
€ 6,95List price€ 7,65In stockDelivery time 1 - 3 business days -
HBM 57-piece tire repair set
Car tire repair set 57 piece in sturdy metal version, with this set you can repair smaller holes caused by nails, screws or other small sharp objects. The HBM 57 Piece Tire Repair Kit consists of. 50 x Tire seal 6 X 100 mm. 1 x drill. 1 x pull needle. 1 x Tire fat. 1 x Glue. 1 x Blade.
€ 9,95List price€ 11,94In stockDelivery time 1 - 3 business days -
weber expert series professional tire balancing machine xl 3d for cars and vans
Noise level 70 dB. |Rim diameter Van 1.5 " tot 20" |Rim width Van 10 " tot 26" |Maximum weight of the wheel 65 Kg. |Balance speed 150 RPM. |Balance time Ca. 7 Seconde. |Voltage 230 Volt. / 1Ph / 50Hz. |Engine power 0,18 kW. |Balance accuracy ± 1 Gram. |Working temperature Van 0 tot 50 ° C. |
€ 1936,70List price€ 2614,55Almost sold out!Delivery time 1 - 4 business days -
HBM motorcycle tire balancing device with adjustable legs
Technical data of the HBM Motorcycle Tire Balancing Device with Adjustable Legs. The motorcycle tire balancing device with adjustable legs and spirit level is used for balancing motorcycle tires. The balancing device for motorcycle tires is supplied with a shaft and clamp cones set. The clamping cones have a conical shape, so that the motorcycle tire is always centered in the middle. That is handy and effective! With the motorcycle tire balancing device you quickly learn where the motorcycle tire is heavier and where not (out of balance). Set the balancing device. If you first place the balancing device on a flat surface, if this is not the case, the balancing device can be adjusted by means of legs. By means of the spirit level you can immediately see whether the device is standing or not. Then slide the axle through the rim and tighten the clamping cones (3 mm Allen key, not supplied). Once the clamping cones are tightened, place the axle with the motor tire attached on it on the balancer. With a slight twist on the motorcycle tire you will soon learn that the tire is not balanced or well balanced. The heavy part of the motorcycle tire will go down and the light up. You adjust the light part with adhesive lead. Tip, first glue the lead with adhesive tape or tape. The adhesive tape adheres well to the rims, this saves you a lot of effort and money. Once the correct weight has been found, stick the adhesive sheet on.
€ 41,95List price€ 50,34In stockDelivery time 1 - 3 business days -
weber profi tire dismantling machine with auxiliary arm and tire balancing machine set
Noise level Minder dan 70 dB. |Rim width Van 1,5 tot 20" |Tension 220v-230V 1ph |Balance time Ca. 8 Seconde. |Motor power 0,75Kw |power 2500-2700kg |Noise level 70db |Air pressure 8 - 10bar |Rim outside diameter 10'' - 20'' |Rim inside diameter 12'' - 24'' |Max wheel diameter 920 mm. |Max wheel height 12''(305 mm) |Gross weight 220 Kg. |Net weight 180 Kg. |Maximum weight of the wheel 65 Kg. |Engine power 0,18 kW. |Balance accuracy 1 G. |Balance speed 150 RPM. |Rim diameter Van 10 tot 24" |
€ 2456,70List price€ 3316,55In stockDelivery time 1 - 4 business days -
HBM valve puller extra strong
Length 125 mm |Width 15 mm |Height 15 mm |
€ 2,95List price€ 3,25In stockDelivery time 1 - 3 business days -
weber expert series professional tire balancing machine for cars and vans with precision 3d monitor
Noise level 70 dB. |Rim diameter Van 1.5 " tot 20" |Rim width Van 10 " tot 32" |Maximum weight of the wheel 75 Kg. |Balance speed 150 RPM. |Balance time Ca. 7 Seconde. |Voltage 230 Volt. / 1Ph / 50Hz. |Engine power 0,18 kW. |Balance accuracy ± 1 Gram. |Working temperature Van 0 tot 50 ° C. |
€ 2511,70List price€ 3265,21In stockDelivery time 1 - 4 business days
-
AOK 270 mm. professional blow gun
Professional pneumatic blow guns. Diameter of the nozzle 6 mm. Equipped with a 6.35 mm (1/4 ″) connection nipple. Handles made of impact-resistant plastic. Top quality made in Taiwan with a 5 year warranty.
€ 5,95List price€ 7,14In stockDelivery time 1 - 3 business days -
AOK car tire valve maintenance set
Technical data of the AOK Car Tire Valve Maintenance Set 1x Pressure gauge 1x Profile depth meter 1x valve key 4x valve extension caps
€ 8,95List price€ 10,74In stockDelivery time 1 - 3 business days -
HBM 6-part punches and punch set
Total length 120 mm. |
€ 10,95List price€ 14,78In stockDelivery time 1 - 3 business days