hbm
-
HBM 52 cc Professional Earth Auger with Petrol Engine - including 3 Drills 100 / 150 / 200 mm.
Drilling a hole in the ground for placing a post, a fence post, or a foundation post, can be quite a task. Especially when it comes to a large number. This strong motorized auger with 52cc combustion engine ensures that a boundary is quickly set and that drilling by hand is a thing of the past. Earth auger for boundary demarcation The strong 52cc engine delivers a large torque, even when it is not running at maximum speed. This ensures that this auger makes less noise while drilling and has a longer life. The supplied augers with diameters of 10 cm and 15 cm can be used to drill holes for thin and thick piles, while the third supplied auger with a diameter of 20 cm is more intended for making foundation holes that will be filled with concrete. All three augers can be easily mounted on the motor shaft without tools (with a locking pin). Soil auger with ergonomics and safety With the large handle with which this HBM auger is held, you can easily provide the necessary counter torque without putting too much strain on the back and arms. The combustion engine is suspended from vibration-damping rubbers, so that the vibrations are not transmitted to the handle. The soft grip handles provide a lot of grip and the engine only revs when both the dead man's button and the throttle are pressed. The 52cc light combustion engine is also easy to start with a pull cord, so easy that the manufacturer has called it an "easystart" system. The HBM auger is supplied complete as shown. This HBM 52 cc Professional Earth Auger with Gasoline Engine - including 3 Drills 100 / 150 / 200 mm comes with. 52cc petrol engine for auger. 3 x steel augers; Á˜ 10, 15 and 20 cm. Manuals. Various installation tools and accessories. Other specifications. Simple and fast motorized drilling in the ground. Powerful, but quiet 52 cc petrol engine (2-stroke). Environmentally friendly and economical to use. Power; 1.45 kW. Idle speed: 2800-3200r/min. starting system; starter cord with CDI quick start ignition. Fuel 2-stroke oil mix "“ 50/1. Fuel tank capacity; 1.2 liters. Durable housing prevents rust and corrosion. Equipped with various safety locks. Anti-vibrating handles. Weighs only 18.2 kg(!). (without drill; 8.6 kg) Dimensions (in use): 280 mm x 570 mm x 820 mm Length: 800 mm.
£ 239,38Regular price£ 323,15In stockDelivery time 1 - 3 working days -
HBM Deluxe Toolboard 71 x 64 cm for Workshop Equipment
With the HBM Tool Board you create a complete workshop layout. The board measures 71 x 64 cm and can be used above any 71 cm wide cupboard. To attach the board to the cabinet, you need a connecting piece set for each board. This set (no. 10085) is available separately. Advantages of the HBM Tool Board Suitable for any cabinet with a width of 71 cm Creates a complete workshop layout Keep tools organized and within reach Easy to attach with separately available coupling set With the HBM Tool Board you keep all your tools organized and within reach. This way you are always working efficiently and you save time. In addition, your workplace looks tidy and organized. Order the HBM Tool Board today and take advantage of the benefits!
£ 31,39Regular price£ 37,68In stockDelivery time 1 - 3 working days -
HBM 4 in 1 Jump Starter Power Station 12V - 20AH
Power station, jump starter, tire inflator, lighting in one compact portable housing. Small enough to always take with you and powerful enough to start even a heavy van with a completely empty battery. The internal battery of this auxiliary station is capable of supplying your car or motorcycle with a starting current of 450A (900A peak). This will get every vehicle going again! The starting current is transferred via short thick copper cables and two sturdy battery terminals that guarantee that little current is lost. This internal battery can be charged with the supplied adapter. The built-in voltmeter on the front shows how large the charging current is with which the internal battery is charged. This internal battery is also the power source of the built-in compressor. This compressor can deliver a pressure of 10 bar. The air hose is stored in a separate compartment, which is long enough to place this power station at a distance of more than half a meter from the tire. The inflation of motorcycle and car tires is thus achieved in a very short time. Adapters are also included (in a separate compartment) to inflate balls and air mattresses. With the pressure gauge on the back you can see exactly how much pressure there is in the tire. On the side there is an output for 12 Volt equipment (cigarette lighter type), with which this station can fulfill a power bank function. There is a clear rotary knob on the front that disconnects the battery from the power station, so that it can never be drained by a leakage current. With the green button on the front a strong LED lamp can be switched on and off. The red button is there to check the status of the internal battery and to determine whether it already needs to be charged. This power station can save you from many problematic situations and is a very handy and portable device to always carry in the trunk. Technical data of the HBM 4 in 1 Jumpstarter Powerstation 12V - 20AH. Type Starting aid. Voltage 12 Volts. Power supply 12 Volt. Capacity 20 Ah. Peak current 900 AMPS. Height 370mm. Width 345mm. Depth 150mm. Other specifications. Equipped with battery check function with indicators. Equipped with LED lighting. 1 x 12 Volt DC output socket. Equipped with built-in compressor with various adapter nipples. Includes adapter for charging the Jumpstarter. Heavy Duty 200 Amp Booster Clamps. Polyethylene housing.
£ 104,62Regular price£ 141,23In stockDelivery time 1 - 3 working days -
HBM 45 Piece Power Sockets and Bit Set in Carbon Foam Inlay for Tool Trolley
HBM 45-piece impact sockets and bit set in carbon foam inlay for tool trolley Choose the HBM 45-piece impact sockets and bit set in carbon foam inlay for tool trolley and enjoy the quality that HBM has to offer. Hex socket forged specifically for use with impact tools. Manufactured from precision cold-forged and hardened chrome vanadium steel with clearly legible, laser-engraved gauges and industrial grade phosphate coating for effective corrosion protection. The thick-walled design gives you stability and durability for repeated high torques. The holes in the side wall allow attachment to the tool via ball locking mechanism or locking pin. View the technical data of the HBM 45-piece impact sockets and bit set in carbon foam inlay for tool trolley below: Impact sockets with 1/2" shank 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32mm. Length of the caps 80 mm. Long bits with 1/2" Torx T27 - T30 - T40 - T45 - T50 - T55 - T60 - T70. Long bits with 1/2" hex socket HW6 - HW7 - HW8 - HW9 - HW10 - HW12 - HW14 - HW17. Length of the bits 100 mm. 1 x 125mm Force extension from 1/2" to 1/2" recording. 1 x 250mm Wrench with 1/2" reception. 1 x 75mm Force knee joint from 1/2" to 1/2" recording. Other specifications: Dimensions of the inlay 54 x 39.5 x 3 cm. Extra durable and wear-resistant CARBON look inlay. Enjoy the quality of HBM with the HBM 45-piece impact sockets and bit set in carbon foam inlay for tool trolley.
£ 104,62Regular price£ 146,47In stockDelivery time 1 - 3 working days -
HBM professional welding angle clamp
(1)
Capacity 75 mm. |Dimensions of the fixed pelvis 100 x 35 mm. |Dimensions of the adjustable jaw 75 x 35 mm. |Capacity 100 mm. |Dimensions of the fixed pelvis 130 x 60 mm. |Dimensions of the adjustable jaw 105 x 60 mm. |
£ 31,40In stockDelivery time 1 - 3 working days -
HBM stretch and butt machine
Maximum capacity 1,2 mm. |
£ 149,54Regular price£ 209,36In stockDelivery time 1 - 3 working days -
HBM adapter nipple 1/4 "- 1/4"
(1)
Wire External 1/4" - 1/4". |
£ 1,75Regular price£ 2,10In stockDelivery time 1 - 3 working days -
HBM 300 piece circlip / circlip assortment
The HBM 300 Piece Borgveer / Seegerring Assortment consists of. Within Borgveren: 15 pieces 7/16 " 15 pieces 1/2 " 15 pieces 9/16 " 15 pieces of 5/8 " 15 pieces 3/4 " 15 pieces 13/16 " Outside Borgveren: 20 pieces 1/4 " 20 pieces 5/16 " 20 pieces 3/8 " 20 pieces 7/16 " 20 pieces 1/2 " 20 pieces 9/16 " 20 pieces of 5/8 " 20 pieces 3/4 " 15 pieces 13/16 " 15 pieces 7/8 " 15 pieces 1 " 5 pieces 1-1 / 4 "
£ 4,45Regular price£ 6,23Almost sold out!Delivery time 1 - 3 working days -
HBM 13 Piece 1/2 Long socket set Metric
The HBM 13 Piece 1/2 Metric Long Socket Set is a powerful and reliable set that comes with 13 different sizes to handle any job. The caps have a total height of 80 mm and range in sizes from 10 - 30 mm. In addition, this set comes in a beautiful steel storage box for easy and safe transport. Whether you work professionally or just do odd jobs at home, the HBM 13 Piece 1/2 Long Metric Socket Set is an excellent choice for all types of projects. Technical data of the HBM 13 Piece 1/2" Long Impact Socket Set: Total height of the caps: 80 mm. Sizes: 10 - 11 - 12 - 13 - 14 -16 - 17 - 19 - 21 - 22 - 24 - 27 - 30 mm. Other specifications: Supplied in a beautiful steel storage box.
£ 39,48Regular price£ 43,43In stockDelivery time 1 - 3 working days -
HBM Transmission Filling Pump Set including 15 Adapters
With the HBM Transmission Filling Pump Set including 15 Adapters you can easily maintain closed automatic transmissions of various car brands such as Ford, BMW, Nissan, Honda, Toyota, Audi and Mercedes. This set is suitable for filling gearboxes, differentials and other automatic transmissions and is supplied with an 8 liter reservoir, a pressure gauge and an overpressure profile. The hand pump gives you more control when reaching the overflow point and the fluid control valve responds immediately. Order this handy transmission filling pump set at HBM today! Characteristics: Transmission filling pump for maintenance of closed automatic transmissions of various car brands Suitable for DSG and CVT gearbox Supplied with a 15-piece adapter set with different angles and thread types With hand pump for more control when reaching the overflow point Fluid control valve responds immediately Content: 8 litres Maximum viscosity: SAE140 Adapter for transmission FORD 1/8 x 27 (NPT) Adapter for transmission VAG Adapter for transmission VAG Porsche Adapter for transmission VAG + Mini Cooper M10 x 1.0 Adapter for transmission VAG DSG M24 x 1.5 Adapter for transmission VAG CVT M22 x 1.5 Adapter for transmission Mercedes: M12 x 1.5 (also for 722.9 transmissions) Not suitable for volatile liquids (gasoline, diesel, etc) With this HBM Transmission Filling Pump Set including 15 Adapters you can quickly and correctly refresh difficult transmissions without spilling. The set comes with different adapters, making it suitable for various car brands. Order today at HBM!
£ 96,54Regular price£ 135,15In stockDelivery time 1 - 3 working days -
HBM Aluminum Top Jaws with Rubber for Extra Grip For in the bench vice
HBM Aluminum magnetic top jaws with Rubber clamping surface for in the vice. These aluminum magnetic top jaws are provided with rubber clamping surfaces in which grooves have been made. These grooves not only provide more grip, but also the possibility to clamp round or polygonal objects. The magnets are milled into the rear of these jaws and consist of iron oxide magnetic strips (iron oxide powder mixed with rubber). . These magnetic strips have the advantage that they are not brittle or fragile (unlike rare-earth or neodymium magnets). As a result, these magnets can never lose small splinters, which can then end up between your machine clamp (or vice) and the top jaw, causing them to no longer connect properly. The magnetic force of these iron oxide rubber strip magnets , is also such that the top jaws are properly pulled towards the clamp (or vice) without magnetizing your workpiece. These magnetic top jaws are available in the following widths: 100 mm - Item no. 9890. 125 mm - Item no. 9891. 150 mm - Item no. 9892.
£ 3,55In stockDelivery time 1 - 3 working days -
HBM Professional Electric Chain Hoists
Maximum capacity 150 Kg. |Voltage 230 Volt. |Power 205 Watt. |Maximum lifting height 300 Cm. |Lifting speed 230 Cm per Minuut. |Diameter of the chain 4 mm. |Dimensions 288 x 221 x 442 mm. (L x B x H) |Maximum capacity 300 Kg. |Power 410 Watt. |Lifting speed 300 Cm per Minuut. |Diameter of the chain 5 mm. |Dimensions 382 x 176 x 600 mm. (L x B x H) |Maximum capacity 500 Kg. |Power 500 Watt. |Lifting speed 280 Cm per Minuut. |Diameter of the chain 6,3 mm. |
£ 145,05In stockDelivery time 1 - 3 working days -
HBM Filler knives
Rust-resistant, spring-tempered steel blades. 2-colored, soft-grip handle with molded handle. For smooth application of fillers. Handle with hanging hole.
£ 1,14In stockDelivery time 1 - 3 working days -
HBM professional wall hose box, water reel, garden hose reel
Hose length 15 of 20 Meter. |Diameter of the hose 10 mm. |Maximum pressure 18 Bar |Hose material PVC. |
£ 79,47In stockDelivery time 1 - 3 working days -
HBM professional pressure regulator for compressor
When you use air pressure tools with too high a working pressure, your tools wear out faster and dangerous situations can arise. With the HBM pressure regulators with you can easily set and lock the working pressure. Because the supply of compressed air is constant, the connected tools can also perform optimally. The pressure regulators can be used with a compressor with a maximum air pressure of 10 bar. Controller reading is in MPa and Psi.
£ 10,74In stockDelivery time 1 - 3 working days -
HBM universal tool trolley with 6 storage bins
Dimensions of the bins 26 x 40 x 16 cm. |Inside dimensions of the bins 23 x 35 x 15,5 cm. |Material of the bins PP (polypropyleen) |
£ 131,57Regular price£ 171,04In stockDelivery time 1 - 3 working days -
HBM 4-piece socket wrench adapter set
Technical data of the HBM 4-part adapter wrench Adapter set. 1 x Gradient from 1/4 "to 3/8" 1 x Gradient from 3/8 "to 1/4" 1 x Gradient from 3/8 "to 1/2" 1 x Gradient from 1/2 "to 3 / 8 "Other specifications. Top quality CRV steel.
£ 3,54Regular price£ 4,96In stockDelivery time 1 - 3 working days -
HBM 25 kilogram soda 0.3-0.7 mm in bag
Soda blasting media is certainly one of the most ideal blasting media to blast car and motorcycle parts, such as cylinder heads, radiators, carburetors and complete engine blocks, among other things! When water is thrown over the used soda after blasting, it dissolves completely and leaves hardly any waste. This makes the product also very environmentally friendly when you are blasting outside. Another major advantage of soda is that it does not damage the surfaces to be blasted. This is especially interesting for products with rubbers. But it also easily cleans oily parts. Soda can also be used as a blasting agent on hard woods, plastic, polyester, stone and all metals. Paint layers on stone walls and boats can be removed layer by layer with the abrasive, without affecting the surface. Soda is excellent for use in blasting boilers with a soda blasting device. Not to be used in blasting cabins.
£ 60,60Regular price£ 72,72Almost sold out!Delivery time 1 - 3 working days -
HBM pneumatic punch pliers and 5 mm offset pliers
Air pressure 6 Bar. |Air consumption Ca. 52 Liter per minuut. |Maximum sheet thickness aluminum 2,0 mm. |Connection 1/4 Inch. |
£ 44,87Regular price£ 49,36Almost sold out!Delivery time 1 - 3 working days -
HBM professional 18 mm snap-off knife with 5 blades
Automatic reloading knife with handle with a non-slip rubber grip and push-button adjustment. Equipped with 8 segment 18 mm. break-off blades. With removable inner housing including 5 pieces of 18 mm blades. The blades can also be broken off with the housing. The knife can be locked in any desired position by means of an adjusting knob. A break-off knife is handy to break off at a groove when the knife is blunt. The HBM Afbreekmes has a magazine for four spare blades for quick and automatic changing of the knife. This snap-off knife is made of ABS plastic for more ease of use and sturdiness. The knife also lasts a long time. The blade lock offers extra safety and accuracy when cutting.
£ 2,65Regular price£ 3,58In stockDelivery time 1 - 3 working days -
HBM 18 volt compressor on battery with accessories
Voltage 18 Volt. |Battery capacity 1300MAH LI-ION Batterij. |Maximum pressure 8 Bar. ( 120 PSI ) |Length of the air hose 30 cm. |
£ 68,69Regular price£ 82,43In stockDelivery time 1 - 3 working days -
HBM 1200 piece HBM cable crimping tool, crimping tool, wire end sleeve rod
Soldering and screwing is a thing of the past: the solid crimping tool with side introduction of HBM makes connecting cables quick and easy. Adjustable, even pressure from all sides makes it possible to work cleanly and precisely with the square pliers. The flexible tool is designed for a large crimping range, has a smooth-running mechanism and is comfortable and secure in the hand. Connect cables quickly and cleanly thanks to the HBM crimping tool. Solid and high-quality processing. Square pressing with side introduction. Shrinking range from 0.25 to 6 mm². Manual pressure setting. Safety lock that can be unlocked quickly. Shrinks stably isolated and non-insulated vein sleeves. Easy to operate. For do-it-yourselfers and professionals. Non-slip handles. Delivered including 1200 core sleeves in various colors and sizes in a practical storage box. Delivered including. 200 x metal sleeves white (length: 8 mm; diameter: 0.50 mm²) 200 x metal sleeves light gray (length: 8 mm; diameter: 0.75 mm²) 200 x metal sleeves red (length: 8 mm; diameter: 1.00 mm²) 250 x metal sleeves black (length: 8 mm; diameter: 1.50 mm²) 250 x metal sleeves blue (length: 8 mm; diameter: 2.50 mm²) 50 x metal sleeves gray (length: 9 mm; diameter: 4.00 mm²) 25 x metal sleeves yellow (length: 12 mm; diameter: 6.00 mm²) 25 x metal sleeves red (length: 12 mm; diameter: 10.00 mm²)
£ 22,41Regular price£ 31,38In stockDelivery time 1 - 3 working days -
HBM 81-piece socket set with ratchet foam inlay for tool trolley
Technical data of the HBM 81-piece socket set with ratchets foam inlay for tool trolley. 1/4 "Ratchet. 1/4 "knee joint 45 mm. 1/4 "extension 100 mm. 1/4 "Sockets 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 "Long Sockets 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 "Ratchet. 3/8 "knee joint 55 mm. 3/8 "Extension piece 150 mm. 3/8 "Sockets 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 "Long Caps 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 "ratchet. 1/2 "knee joint 75 mm. 1/2 "extension 125 mm. 1/2 "Sockets 8, 9, 10, 11, 12, 13.14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm. 1/2 "Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm. Other specifications. Dimensions of the foam inlay 54 x 39.5 x 3 cm. Top quality CRV socket set.
£ 86,65Regular price£ 116,98In stockDelivery time 1 - 3 working days -
HBM LED lamp on magnetic base
Technical data of the HBM LED Lamp on magnetic base. Number of LEDs 3 Diameter Magnetic base 65 mm. Length Flexible part 120 mm. Total height 260 mm.
£ 6,24Regular price£ 6,86In stockDelivery time 1 - 3 working days -
HBM 5-part hammer puller, dent puller
The versatile 'Heavy-Duty' hammer puller from HBM features a strong steel shaft with a handy vinyl grip for a comfortable and firm grip. This hammer puller is perfect for dents in car panels and removing hard-to-move bearings from axles and hubs. Including useful accessories nose cone 2 x pull screws L hook Cast iron hammer Weighing only 1.5 kg and measuring 460 mm in length, this 5-piece hammer puller is easy to handle and store. Make your work easier and more efficient with the HBM 5-piece hammer puller, dent puller. Perfect for both professional and home use.
£ 11,63Regular price£ 15,71Almost sold out!Delivery time 1 - 3 working days -
HBM professional 7-piece anti magnetic stainless steel tweezers set
Length of the tweezers 125 mm. |
£ 8,94Regular price£ 9,83In stockDelivery time 1 - 3 working days -
HBM deburring set with 10 blades
The HBM Deburring Set with 10 Blades is a high-quality deburring set with which you can remove small, sharp edges from metals, plastics, wood and other materials. With this set you can also smooth rough surfaces and remove burrs from holes and edges, for example. The deburring set comes with 10 blades of different thicknesses and lengths, so you have the right blade for every job. The blades are made of high-quality steel and are therefore very strong and durable. They can be easily replaced, which means that the deburring set will last for a long time. The set comes in a handy storage box, so you can safely store the deburring set when not in use. Characteristics: - High quality deburring set with 10 blades - Suitable for various materials, such as metal, plastic and wood - Remove sharp edges and burrs - Smoothing rough surfaces - 10 different blades of different thicknesses and lengths - Made of high quality steel - Easy to replace blades - Comes in a handy storage box - Brand: HBM The HBM Deburring Set with 10 Blades is a handy and versatile deburring set that is suitable for both professionals and hobbyists. Order it today and put an end to sharp edges and burrs quickly and easily!
£ 8,94Regular price£ 12,51In stockDelivery time 1 - 3 working days -
HBM 140 mm plastic funnel with spout
Plastic funnel with mesh filter. Thick, durable plastic.
£ 0,89Regular price£ 1,16In stockDelivery time 1 - 3 working days -
HBM 6-piece steel brush set for the drill
1 x bowl brush 35 mm. |1 x bowl brush 65 mm. |2 x disc brush 40 mm. |1 x disc brush 50 mm. |1 x disc brush 75 mm. |1 x disc brush 100 mm. |Maximum speed 4500 O/min. |
£ 4,45Regular price£ 6,23In stockDelivery time 1 - 3 working days -
HBM professional 200 mm wire cutter
Total length 20 mm. |Capacity in Steel 5 mm. |
£ 8,04Regular price£ 10,46In stockDelivery time 1 - 3 working days