Sanding machines Products
-
HBM 12 mm. sanding drum
All our products have a warranty of at least 1 year.
£ 0,11In stockDelivery time 1 - 3 working days -
HBM sanding discs with roloc recording
All our products have a warranty of at least 1 year.
£ 0,85In stockDelivery time 1 - 3 working days -
HBM lamella sanding discs
(1)
Recording Roll on opname |Diameter 50 mm. |
£ 1,75In stockDelivery time 1 - 3 working days -
HBM 10-piece set 50 mm. velcro sanding discs, sanding pads
Technical specifications of the HBM 10-part set 50 mm. Velcro Sanding Discs, Sanding Pads. Packed per 10 pieces. Equipped with Velcro recording.
£ 0,85In stockDelivery time 1 - 3 working days -
HBM 100 x 1220 zirconium sanding belts blue
(1)
All our products have a warranty of at least 1 year.
£ 3,54In stockDelivery time 1 - 3 working days -
HBM sanding belts 13 x 457 mm. packed per 5 pieces
The flexible and durable aluminum oxide sanding belts fit all 13 x 457 mm sanders. Full resin compound.
£ 1,75In stockDelivery time 1 - 3 working days -
HBM 100 x 1220 mm. ceramic sanding belts
The Ceramic Sanding Belts cut exceptionally fast and remain sharp during grinding because the material renews itself. These professional belts provide cost effective performance in medium pressure applications where an all ceramic tire is overqualified. For professional applications on metal, stainless steel and aluminum with an extremely long service life due to the cooling-grinding effect of the ceramic grain. As a result, there is less heat development, especially on stainless steel and aluminum.
£ 6,23In stockDelivery time 1 - 3 working days -
HBM sanding fleece
Recording Roll on opname |
£ 1,18In stockDelivery time 1 - 3 working days -
HBM scotch brite clean & finish roll - 5 meters
Ideal for the daily cleaning of all types of dirt on different surfaces. Easy to rinse and reusable.
£ 10,71In stockDelivery time 1 - 3 working days -
HBM 50mm x 5m emery cloth
synthetic resin-bonded corundum scattering (A) on highly flexible textile (brown), uniform and slightly open. With very good grain adhesion, long tool life, low pressure force and very good adaptability. Roll length 5 meters. Width: 50 mm. Application: For pure hand sanding even under extremely high loads, with straightforward tear behavior without fraying. Oil and petroleum resistant, for machining alloyed and unalloyed steel as well as non-ferrous metals. Ideal for machining fittings, reservoirs, castings and forgings, bodywork parts etc.
£ 2,64In stockDelivery time 1 - 3 working days -
HBM Professional 1500 Watt Concrete Sander - 125 mm
(3)
HBM Professional 1500 Watt Concrete Sander - 125 mm Looking for a concrete sander to make concrete nice and smooth? The HBM Professional 1500 Watt Concrete Sander - 125 mm is the perfect solution for you! This concrete sander is ideal for sanding concrete, tiles and stone. It is simple, dust-free and fast with a constant speed. The large, sturdy and comfortable handle allows you to finish your work accurately. The concrete sander comes with a storage case to store it safely and neatly and to easily take it with you to any job. Product specifications of the HBM Professional 1500 Watt Concrete Sander - 125 mm: Power consumption: 1500 W No-load speed: 1000-8500 rpm Diameter: 125mm Blade material: diamond Inclusive: Diamond cup wheel Storage case In short, the HBM Professional 1500 Watt Concrete Sander - 125 mm is the best solution for your sanding needs. And with the storage case you are sure that you can take this reliable concrete sander anywhere!
£ 131,20Regular price£ 157,45In stockDelivery time 1 - 3 working days -
HBM 200 mm sanding discs
Technical data of these sanding discs. The discs are provided with an adhesive layer for mounting.
£ 2,64In stockDelivery time 1 - 3 working days -
HBM polishing felt
Recording Roll on opname |
£ 0,85In stockDelivery time 1 - 3 working days -
HBM cleansing discs
Technical data of the HBM Clean disks. Particularly suitable for removing stubborn and light rust, the removal of paint or paint from metal, the removal of the residual paint on weld seams (stainless steel) and for roughening (of sutures, for example). Suitable for cleaning the weld seam (steel and stainless steel), the matt sanding of steel / stripes during the surface finishing work, cleaning of non-ferrous metals / brass / copper / aluminum, structuring of wood.
£ 1,75In stockDelivery time 1 - 3 working days -
HBM waterproof sandpaper pack of 10 pieces
HBM Waterproof sandpaper pack 10 pieces is available in grit 120 to 1200 and is suitable for wet sanding of treated wood, metal, glass, ceramics or polyester and is ideal for removing minor irregularities. Waterproof sandpaper can be used for both dry and wet sanding. Wet sanding has the advantage that no dust is released when sanding, that there are fewer scratches in the substrate and that you also clean and degrease the surface to be painted. Wet sanding is ideal for super smooth sanding for the last layer. Sand only with wet sandpaper on painted wood, never on untreated wood, because water causes the wood to swell. The sandpaper can be used by hand, a sanding block or sander. Dimensions per sheet: 230 x 280 mm.
£ 2,64In stockDelivery time 1 - 3 working days -
HBM 75 x 2000 zirconium sanding belts blue
All our products have a warranty of at least 1 year.
£ 4,43In stockDelivery time 1 - 3 working days -
HBM lamella sanding disc with 6 mm. recording
Recording 6 mm. |Grain K80 |
£ 1,75In stockDelivery time 1 - 3 working days -
HBM 150mm pneumatic sander
Sanding disc diameter 150 mm. |Workload 6 Bar. |Air consumption 120 Liter per Minuut. |No-load speed 9000 O/min. |Dimensions 175 x 145 mm. |
£ 35,79Regular price£ 48,32In stockDelivery time 1 - 3 working days -
HBM 35-piece sanding, polishing and clean set with 6 mm mandrel
The HBM 35-piece Sanding, Polishing and Clean set with 6 mm mandrel from the HBM brand is a multifunctional set that is suitable for various sanding, polishing and cleaning activities. The set consists of 35 different parts, including sanding discs, nylon sanding fleece and cleaning discs with a diameter of 50 mm and a Roloc holder. 5 x Sanding disc 50mm. K60 with Roloc recording. 5 x Sanding disc 50mm. K80 with Roloc recording. 5 x Sanding disc 50mm. K100 with Roloc recording. 5 x Nylon Abrasive Fleece 50 mm. FINE with Roloc recording. 5 x Nylon Abrasive Fleece 50 mm. MEDIUM FINE with Roloc reception. 5 x Nylon Abrasive Fleece 50 mm. COARSE with Roloc recording. 4 x cleaning disc 50 mm. with Roloc recording. 1 x Roloc holder with 6 mm. Axis Recording. The sanding discs are available in grit thicknesses K60, K80 and K100 and ensure fast and efficient material removal. The nylon abrasive fleece pads are available in FINE, MEDIUM FINE and COARSE and are suitable for polishing and cleaning surfaces. The cleaning discs are perfect for removing rust, paint and other stubborn dirt. The Roloc holder with 6 mm axle reception ensures that the parts can be replaced quickly and easily. This set is suitable for use with a drill or other tools with a 6 mm arbor. In short, the HBM 35 Piece Sanding, Polishing and Clean set with 6 mm mandrel is a complete set that is suitable for various activities and an absolute must-have for every do-it-yourselfer.
£ 13,40Regular price£ 18,75In stockDelivery time 1 - 3 working days -
HBM 150 mm. sanding disc with velcro and holes
All our products have a warranty of at least 1 year.
£ 0,85In stockDelivery time 1 - 3 working days -
HBM 150 mm. profi pneumatic vacuum sander
Sanding disc diameter 150 mm. |No-load speed 10000 o/min. |Air consumption 130 L/min. |
£ 44,75Regular price£ 60,41In stockDelivery time 1 - 3 working days -
HBM 175 / 150mm professional polisher - sander
(1)
Diameter of the polishing wheel 175 mm. |Sanding disc diameter 150 mm. |No-load speed 3000 O/min. |Workload Ca. 6 bar. |Air consumption Ca. 325 L/min. |
£ 68,50Regular price£ 89,05In stockDelivery time 1 - 3 working days -
HBM sandpaper pack of 10 pieces
The sandpaper is particularly suitable for manual or mechanical sanding of untreated wood and the removal of old paint and varnish layers. The sheets are A4 size and are available in K60 / K220.
£ 0,55In stockDelivery time 1 - 3 working days -
HBM holders with 6 mm. ash
Technical data of the 6 mm HBM Holders. Ash. This holder is suitable for all Roloc recording accessories. The accommodation of this holder is 6 mm. Other Specifications. The sanding discs shown are not included.
£ 2,64In stockDelivery time 1 - 3 working days -
HBM 520mm pneumatic power file / belt sander extra wide
No-load speed 16000 O/min. |Dimensions of the sanding belt 20 x 520 mm. |Air consumption Ca. 150 L/min. |Dimensions 350 x 90 mm. |
£ 38,48Regular price£ 51,95In stockDelivery time 1 - 3 working days -
HBM 150 mm sanding discs
Technical data of these sanding discs. The discs are provided with an adhesive layer for mounting.
£ 0,85In stockDelivery time 1 - 3 working days -
HBM 225 mm sanding discs
Technical data of these sanding discs. The discs are provided with an adhesive layer for mounting.
£ 2,64In stockDelivery time 1 - 3 working days -
HBM satin machine - brush machine
Engine power 1200 Watt |No-load speed 1000-3000 min |Maximum wheel diameter 120 mm |Maximum wheel length 100 mm |Diameter of the recording shaft 19 mm. |
£ 128,52Regular price£ 154,22In stockDelivery time 1 - 3 working days -
HBM velcro sanding disc holder with 6 mm. ash
All our products have a warranty of at least 1 year.
£ 1,75In stockDelivery time 1 - 3 working days -
HBM nylon web sanding cylinder for satinizing machine 100 x 120 mm grit 240
Grit 240. |
£ 9,81Regular price£ 13,25Almost sold out!Delivery time 1 - 3 working days