Others Products
-
HBM 110 piece grease nipple assortment
Technical data of the HBM 110 Delig Vetnippel Assortment. 60 pieces of M6 x 1. 5 pieces of M 6 x 1 x 45 degrees. 5 pieces of M 6 x 1 x 90 degrees. 10 pieces of M 8 x 1.25 5 pieces of M 8 x 1.25 x 45 degrees. 5 pieces of M 8 x 1.25 x 90 degrees. 10 pieces of M10 x 1.5 5 pieces of M10 x 1.5 x 45 degrees. 5 pieces of M10 x 1.5 x 90 degrees.
£ 8,94Regular price£ 12,51In stockDelivery time 1 - 3 working days -
HBM scriber model 1
Total length 165 mm. |
£ 1,75Regular price£ 2,27In stockDelivery time 1 - 3 working days -
HBM Fe Wheel Weight Zinc For Steel Rims
This product has a minimum 1-year warranty. This product is delivered quickly throughout Europe.
£ 5,82In stockDelivery time 1 - 3 working days -
HBM 75 mm. cup brush with corrugated steel wire with m14. recording.
Diameter 75 mm. |Recording M 14x2 |Maximum speed 12500 O/min. |
£ 1,75Regular price£ 1,92In stockDelivery time 1 - 3 working days -
HBM aluminum tape 0.1 mm x 50 mm x 50 m
Technical data of the HBM Aluminum Tape 0.1 mm x 50 mm x 50 m For all your work in air treatment technology Assembly of insulation sleeves and panels. Good adhesion to rough surfaces. Tape with a long service life. Protection against moisture. Can be torn off by hand.
£ 7,14Regular price£ 9,28In stockDelivery time 1 - 3 working days -
vikan basic microfibre cloth green
Perfect for general cleaning. Suitable for all types of hard surfaces. With dry use, it absorbs the smallest dust and dirt particles through static electricity. Moist with water absorbs dirt and grease through the capillary effect. Technical data of the Vikan Basic Micro fiber cloth Green Micro fiber cloth BASIC 40: 400 x 400 mm Surface: 80% polyamide, 20% polyester, 100% microfibre Preparation: 75% humidification
£ 4,45Regular price£ 5,34In stockDelivery time 1 - 3 working days -
vikan luster microfibre glass cloth red
(1)
The glossy cloth is ideal for cleaning windows, mirrors and hard-polished surfaces such as stainless steel and other shiny metal surfaces. The cloth must be used dry or damp with water and no chemicals. Cleans without leaving lint or streaks. Technical data of the Vikan Luster Microfiber Glass Cloth Red Vikan Microfiber cloth LUSTRE split microfibre
£ 6,24Regular price£ 8,11In stockDelivery time 1 - 3 working days -
Telesteps Work platform for Combi Line
With the Telesteps Work Tray you always have the right tools at your fingertips. The last thing you want to do on the job is to waste valuable time in addition to your normal duties. This is a thing of the past with the handy Telesteps Work Tray. Specifications: Article number: 9180-101 Barcode: 7394483091802 Brand: TELESTEPS Net weight (kg): 0.46 Material: Plastic Type of accessories / parts: Work platform : Logo 2: Presentation document / presentation file: Certificate:
£ 28,70Regular price£ 40,18In stockDelivery time 1 - 3 working days -
Scheppach Saw blade for wood HM100MP
(1)
Special characteristics Scheppach saw blade for wood suitable for HM100MP. Specifications Width: tooth: 2.8 mm Diameter: 255mm Suitable for: HM100MP Shaft diameter: 30 mm Number of teeth: 48 Specifications: Item number: 7901200706 Barcode: 4014915091325 Brand: SCHEPPACH Net weight (kg): 0.755 Bore diameter: 30 mm Number of teeth: 48 Saw blade diameter: 255 mm Suitable for metal: No Suitable for plastic: No Suitable for stone: No Suitable for wood: Yes Saw blade thickness: 2.8 mm Logo 1: Logo 2:
£ 13,44Regular price£ 17,47In stockDelivery time 1 - 3 working days -
Irwin 1/4" Quick Change Bit Holder-300mm/12"
(1)
Specifications: Item number: IR10508168 Barcode: 5706915081688 Brand: IRWIN Net weight (kg): 0.22
£ 14,33Regular price£ 20,06In stockDelivery time 1 - 3 working days -
KWB Wood Twist Drills 17mm Card
Wood twist drills, CV steel, formed without chips, double spiral, for a stable and straight run-out, color black, brightly ground spirals, with center point and shoulder cutter, for precise and tear-free drilling, cylindrical shank, industrial quality, for soft and hard wood. Specifications: Item number: KWB511477 Barcode: 4009315114774 Brand: KWB Net weight (kg): 0.163
£ 7,14Regular price£ 8,57In stockDelivery time 1 - 3 working days -
Sievert Filling pipe inw.dr.Shell for filling gas bottle
204402 standard: Shell/M14x1.5 for bottles 2000 and 2012 No. 204405. For the bottle Shell 201318 Specifications: Item number: 204402 Barcode: 7314522044026 Brand: SIEVERT Net weight (kg): 0.16 Hose connection diameter: 14 mm Material: Brass
£ 22,41Regular price£ 30,26In stockDelivery time 1 - 3 working days -
Pica 522/52 Perm. Marker 2-4mm round tip white, bli
Permanent Marker Classic from Pica. Special characteristics For permanent marking on almost all surfaces Specifications: Item number: PI52252SB Barcode: 4260056156724 Brand: PICA Net weight (kg): 0 Colour White Dimension: Round Permanent: Yes Suitable for dry wood: Not Suitable for wet wood: Not Suitable for dry rubber: Good Suitable for wet rubber: Not Anti-slip grip: Yes Packaging: Blister packaging Refillable: No Suitable for ceramics: Good Suitable for concrete/concrete stone: Moderate Suitable for glass: Very good Suitable for laminate: Very good Suitable for leather: Good Suitable for metal: Very good Suitable for plastic: Very good With clip: No
£ 2,65Regular price£ 3,72In stockDelivery time 1 - 3 working days -
KWB Glue Comb, Plastic 140X180mm
Plastic, toothed on 4 sides, a different tooth shape on each side, for applying adhesive, tile adhesive with different bond strengths and adhesive mortar Specifications: Item number: KWB32900 Bar code: 4009310329005 Brand: KWB Net weight (kg): 0.038
£ 1,75Regular price£ 2,27In stockDelivery time 1 - 3 working days -
HBM knockout splines
Technical data of the HBM Uitdrijfspie. Hardened Skewers.
£ 2,65In stockDelivery time 1 - 3 working days -
HBM professional caulking gun
For easy application of seals and adhesives around corners without stopping or repositioning the nozzle. Handle with soft grip, press pin and release clip. Nice heavy steel version. Suitable for patterns of kit, silicone or glue.
£ 5,35Regular price£ 6,41In stockDelivery time 1 - 3 working days -
HBM 64 piece waterproof heat shrink tubing assortment
Technical data of the HBM 64 Piece Waterproof Heat Shrink Tube Assortment: 12pcs AWG12-10, 4-6mm2. (Yellow) 16pcs AWG16-14, 1.5-2.5mm2. (Blue) 36 pieces AWG22-16, 0.5-1.5mm2. (Red) Applications: These butt joint connectors are provided with shrink tubing that can be heat shrinked. These connectors are also provided with glue so that the connector is well protected against corrosion, water, salt and other types of liquids. The connector is embossed to firmly anchor the crimped cables and protect them from harsh conditions. The connectors are fitted with very good insulation material. These Butt connectors with shrink tubing are made for long-term use, including in the car and machine industry. Characteristics: Automotive/truck cable repair and fleet maintenance. Automotive/truck/RV wire harness fabrication. Industry wiring of pumps, electronics and PCB. Fleet Maintenance & Marine Electronics. Operating / working temperature: -40°C ~ 105°C. Minimum shrinkage temperature: 80°C. Minimum final shrinkage temperature: 100°C.
£ 8,94Regular price£ 10,72In stockDelivery time 1 - 3 working days -
HBM 4-part threaded rod, stud extractor set - threaded extractor
With the HBM 4 Piece Threaded End, Stud Extraction Set - Threaded End Extractor, unscrewing defective threaded ends and studs is a thing of the past. This handy set is suitable for threaded rods of 6, 8, 10 and 12 mm and has a reception of 1/2" or 21 mm. It also has a square drive according to DIN 3120 - ISO 1174 with ball lock and a hexagonal drive SW 21. The set also has a right and left tension function and a good grip thanks to the 3 clamping bushes. Features of the HBM 4 Piece Threaded End, Stud Extraction Set - Threaded End Extractor: suitable for loosening defective threaded rods and studs of 6, 8, 10 and 12 mm square drive according to DIN 3120 - ISO 1174 with ball lock hexagon drive SW 21 with right and left clamping function good grip due to 3 clamping bushes screw in and out without having to screw 2 nuts on the threaded end the power transmission runs via 3 internal shafts, which clamp the stud suitable for longer threaded ends thanks to the hollow shaft high gloss chrome plated chrome vanadium In short, the HBM 4-piece threaded end, stud extractor set effortlessly turns out defective threaded ends and studs and is also suitable for longer threaded ends. In addition, this printout set is high-gloss chrome-plated and made of chrome vanadium.
£ 17,02Regular price£ 22,98In stockDelivery time 1 - 3 working days -
HBM 310 mm 6tpi scrub saw
Tri-Cut saw with a hardened saw blade and 3-way sharpened teeth for fast cutting results in hard, soft and artificial woods. Cuts in both forward and backward directions. Ideal for sawing arcs and circles in wood and plastic. Equipped with hardened teeth for extra long life.
£ 2,65Regular price£ 3,58In stockDelivery time 1 - 3 working days -
HBM paint mixer model 2
Diameter of the head 100 mm. |
£ 3,54Regular price£ 4,61In stockDelivery time 1 - 3 working days -
HBM 2-part polishing pads for the HBM 240 mm. car polisher
Technical data of the HBM 2-part polishing pads for the HBM 240 mm. Car polishing machine. Synthetic polishing pads for use on the HBM 240 mm. Car polishing machine. Diamter: 230 mm.
£ 2,65Regular price£ 3,72In stockDelivery time 1 - 3 working days -
HBM 16-piece pen ejector and cold chisel set
Sizes Center Points 3 x 125 mm, 5 x 150 mm. |
£ 9,84Regular price£ 13,77In stockDelivery time 1 - 3 working days -
Gloria pressure sprayer 3 liters - Prima 3
(1)
Specifications: Article number: GLO023530 Barcode: 4046436023530 Brand: GLORIA Net weight (kg): 0 Acid Resistant: No. Adjustable nozzle: Yes Effective content: 3 l Container material: Plastic Execution: Pressure sprayer Portable: Yes Pump system: Manual Tank capacity: 5 l Volume: 3 l With viewing window: Yes
£ 31,39Regular price£ 34,54In stockDelivery time 1 - 3 working days -
HBM 11-piece universal saw for wood, metal and ceramics
Brand: HBM Description: The HBM 11-piece universal saw for wood, metal and ceramics is the solution for almost every sawing project. This saw package contains various saw blades to cut aluminium, metal, acrylic, wood, rubber, rope, electric wire and ceramics. The blades are easy to change. Technical data: 6x150mm. Saw blade for wood and metal. 2 x 150mm. Saw blade for glass. 1 x 150mm Saw blade for wood. ( course ) You can saw almost anything with the HBM 11-piece universal saw for wood, metal and ceramics. This package contains saw blades of different sizes and grades, so that you have the right saw for every material. The saw blades are easy to change. This makes the HBM 11-piece universal saw for wood, metal and ceramics very user-friendly. The saw blades are suitable for different materials. For example, if you want to cut aluminum or metal, you can use the 150 mm. Use saw blades for wood and metal. There is a special saw blade of 150 mm for glass. available. In addition, the package includes a 150 mm. Saw blade for wood ( coarse ), with which you can easily cut wood with coarse fibers. The HBM 11-piece universal saw for wood, metal and ceramics is a must-have for every handyman, do-it-yourselfer and professional. Thanks to the saw package you have the right saw at hand for everything. This way you can quickly get started with all your sawing projects!
£ 9,84Regular price£ 11,81In stockDelivery time 1 - 3 working days -
vikan nail brush
Durable nail brush that is also ideal as upholstery for cleaning cloths and carpets. Technical data of the Vikan nail brush Nail brush hard polyester fibers fiber length 15 mm max. 100 ° C. 40 x 120 x 47 mm
£ 7,14Regular price£ 10,00In stockDelivery time 1 - 3 working days -
HBM 800 ferrules in various colors and sizes
Soldering and screwing is a thing of the past: the solid crimping tool with side introduction of HBM makes connecting cables quick and easy. Adjustable, even pressure from all sides makes it possible to work cleanly and precisely with the square pliers. The flexible tool is designed for a large crimping range, has a smooth-running mechanism and is comfortable and secure in the hand. Connect cables quickly and cleanly thanks to the HBM crimping tool. Solid and high-quality processing. Square pressing with side introduction. Shrinking range from 0.25 to 6 mm². Manual pressure setting. Safety lock that can be unlocked quickly. Shrinks stably isolated and non-insulated vein sleeves. Easy to operate. For do-it-yourselfers and professionals. Non-slip handles. Delivered including 1200 core sleeves in various colors and sizes in a practical storage box. Technical data of the HBM 800 core sleeves in various colors and sizes. 100 pieces of green 12 x 6.00 mm2. 100 pieces of gray 12 x 4.00 mm2. 100 pieces of blue 12 x 2.50 mm2. 100 pieces of black 12 x 1,500 mm2. 100 pieces of red 8 x 1.00 mm2. 100 pieces of white 8 x 0.75 mm2. 100 pieces of orange 8 x 0.50 mm2. 100 pieces of yellow 6 x 0.50 mm2.
£ 8,04Regular price£ 9,65In stockDelivery time 1 - 3 working days -
Steinel pressure roller 47 mm
(1)
pressure roller. For glued edges and perfect welding of PVC tarpaulin. For the professional hot air guns HG 2120 E, HG 2220 E and HG 2320 E, HG 2000 E, HG 2300 E and HG 2310 LCD as well as the hot air guns HL 2020 E, HL 1920 E and HL 1620 S, HL 2010 E, HL 1910 E, HL 1810 S and HL 1610 S. Specifications: Item number: 012311 Barcode: 4007841012311 Brand: STEINEL Net weight (kg): 0.39 Accessories: Yes Version: Pressure roller Part: Yes Accessory/part type: Other Logo 2:
£ 16,12Regular price£ 17,73In stockDelivery time 1 - 3 working days -
HBM Foam Gun for Car Model 2
The HBM Foam Gun is connected to compressed air and produces an ultra dry foam. This is intended as a pre-wash to safely remove as much dirt as possible from your car, truck, caravan or boat before washing. It only serves as a prewash method. Technical data of the HBM Foam Gun for Car Model 2. Tank content 1 litre Color White Weight 1kg Compressed air 6 and 9.2 bar Air consumption 245 l/min at 5.5 bar Other specifications. Supplied with 2 nozzles.
£ 14,33Regular price£ 18,62In stockDelivery time 1 - 3 working days -
HBM Ash / BBQ Vacuum Cleaner 1000 Watt, Including 2 Dust Filters
A cozy fire or an atmospheric barbecue among friends have one thing in common: as a useful tool for cleaning them afterwards. Due to the combination of a powerful 1000W motor and a Hepa filter, this vacuum cleaner is not only ideal for removing cooled ashes or charcoal particles, but also for vacuuming sawdust. The HBM Ash Vacuum Cleaner, Vacuum Cleaner 1000 Watt, Including 2 Dust Filters is equipped with an 18L steel tank and a 1m hose with aluminum suction nozzle. Technical data of the HBM Ash Vacuum Cleaner, Vacuum Cleaner 1000 Watt, Including 2 Dust Filters Voltage 220-240 V~ Power 1000W. Tank capacity 18 litres. Cable length 2.5m. Nozzle Diameter 32mm. Suction nozzle Aluminium. Hose diameter 36.5mm and hose length 1 meter. Tank height 275mm and tank diameter 300mm. Filter HEPA filter. Filter cleaning integrated. Weight 3.3 kg. This HBM Ash Vacuum Cleaner, Vacuum Cleaner 1000 Watt, Including 2 Dust Filters is supplied as standard. Suction hose. Aluminum suction mouth. 2 x HEPA filter. Instruction manual.
£ 35,89Regular price£ 48,46In stockDelivery time 1 - 3 working days -
Raaco Transport case Solid 1, blue
(1)
Sturdy small transport box with 2 click closures that can be stacked with the other suitcases from this series. The handle is integrated and a lock can be hung on it, so that you can safely store your belongings. Special characteristics: sturdy material stackable lockable with padlock Specifications: Item number: 136754 Barcode: 5733439136754 Brand: RAACO Net weight (kg): 0.525 Color blue Depth: 175mm Depth range: 15 to 20 cm Height: 125mm Height range: 0 to 25 cm Material: Plastic Quality class: Other Version: Tool box Padlock Shackle: Yes Removable compartment: No Rollable: No Signal red: No Total number of courses: 1 Foldable: Yes Width: 275mm Width range: 25 to 50 cm With lid: Yes With divider: No With foam: No With handle: Yes With lock: No With closure: Yes With shoulder strap: No With telescope handle: No With tool board: No With wheels: No Logo 2:
£ 17,02Regular price£ 22,98In stockDelivery time 1 - 3 working days