Bench Screws and Anvils Products
-
HBM professional long glue clamp / t-clamp
(2)
Long Glue clamp - T - clamp with painted finish. Cast iron heads and feet. For applying high pressure. Technical data of the HBM Professional Long Glue Clamp / T-Clamp These clamps are available in 3 different lengths Maximum clamping capacity 410/770/1070/1370/1670 mm.
£ 12,53In stockDelivery time 1 - 3 working days -
HBM folding jaws for in the vice
(1)
Technical data of the HBM Zetbek for the vice. Magnetic jaws for the vice. For setting sheet steel up to 3 mm. fat.
£ 22,41In stockDelivery time 1 - 3 working days -
HBM 75 mm. steel and nylon anvil in rubber holder
Technical data of the HBM 75 mm. Steel and Nylon Anvil in Rubber Holder. Size Steel anvil 75 x 16 mm. Size Nylon anvil 75 x 16 mm. Size Rubber foot 100 x 30 mm.
£ 8,94Regular price£ 9,83Almost sold out!Delivery time 1 - 3 working days -
HBM hand vise model 4
Jaw width 8 mm. |Maximum opening of the pelvis 2,5 mm. |Total length 130 mm. |
£ 5,35Regular price£ 5,88In stockDelivery time 1 - 3 working days -
HBM aluminum top jaws with rubber
Magnetic jaws covered with rubber.
£ 5,82In stockDelivery time 1 - 3 working days -
HBM hand anvil
Sizes 100 x 100 x 35 mm. |
£ 8,94Regular price£ 9,83Almost sold out!Delivery time 1 - 3 working days -
HBM aluminum top jaws for the vice
Magnetic jaws.
£ 5,35In stockDelivery time 1 - 3 working days -
HBM aluminum top jaws with double f
Magnetic jaws with a horizontal and vertical V in the jaws.
£ 4,66In stockDelivery time 1 - 3 working days -
HBM 2.5 x 300 mm. plate roller for the vice
(1)
Maximum working width 300 mm. |Maximum rolling capacity over the entire working width 2,5 mm. |Diameter of the rollers 32 mm. |
£ 127,07Regular price£ 177,90In stockDelivery time 1 - 3 working days -
HBM Aluminum Top Jaws with Rubber for Extra Grip For in the bench vice
HBM Aluminum magnetic top jaws with Rubber clamping surface for in the vice. These aluminum magnetic top jaws are provided with rubber clamping surfaces in which grooves have been made. These grooves not only provide more grip, but also the possibility to clamp round or polygonal objects. The magnets are milled into the rear of these jaws and consist of iron oxide magnetic strips (iron oxide powder mixed with rubber). . These magnetic strips have the advantage that they are not brittle or fragile (unlike rare-earth or neodymium magnets). As a result, these magnets can never lose small splinters, which can then end up between your machine clamp (or vice) and the top jaw, causing them to no longer connect properly. The magnetic force of these iron oxide rubber strip magnets , is also such that the top jaws are properly pulled towards the clamp (or vice) without magnetizing your workpiece. These magnetic top jaws are available in the following widths: 100 mm - Item no. 9890. 125 mm - Item no. 9891. 150 mm - Item no. 9892.
£ 3,55In stockDelivery time 1 - 3 working days -
HBM 150 mm Cabinetmaker vice
This Cabinetmaker Vise has a cast iron frame with chrome plated screw handle and alignment bars. The Furniture Makers Vice can be mounted on any workbench, can be mounted on top and bottom of the workbench for light clamping work. Specifications of the HBM 150 mm Cabinetmaker Vice. rotatable new Confirmation Screw Maximum opening 125MM
£ 17,93Regular price£ 23,31In stockDelivery time 1 - 3 working days -
HBM 60 mm vice with table clamp
Jaw width 50 mm. |Maximum opening of the pelvis 60 mm. |Maximum opening of the table clamp 50 mm. |
£ 11,63Regular price£ 13,96In stockDelivery time 1 - 3 working days -
HBM superjaws portable clamping system - vice
The HBM Superjaws Portable Clamping System - Vise offers powerful clamping force of 1000 kg for a controlled clamping pressure. The reversible sliding jaw provides an extra wide 956mm clamping capacity. The foot-operated clamping system leaves both hands free for full control over the workpiece. The extra-wide tripod provides maximum stability and the strong, powder-coated steel construction ensures a long service life. Technical data: Stable but compact folding chassis Clamps materials up to 956 mm wide Clamp is operated by foot pedal Clamping force up to 1000 kg Folded dimensions: 275 x 775 x 295 mm Unfolded dimensions: 980 x 1000 x 860 mm Weight: 16 kg The HBM Superjaws Portable Clamping System - Vise is perfect for those looking for a portable and powerful clamping system. It offers the possibility to clamp materials with a width of up to 956 mm with a clamping force of up to 1000 kg. This clamping system is easy to operate with the foot pedal and the extra-wide tripod provides maximum stability, while the strong powder-coated steel construction ensures a long service life. Invest in the HBM Superjaws Portable Clamping System - Vise and experience a higher degree of efficiency and accuracy while working with your workpieces.
£ 112,70Regular price£ 135,25In stockDelivery time 1 - 3 working days -
black steel professional steel vises with pipe clamp
Base diameter 165 mm. |Jaw width 100 mm. |HOH mounting size 140 mm. |Maximum opening 140 mm. |Dimensions 420 x 155 x 180 mm. |Unloading 65 mm. |Jaw width 200 mm. |Dimensions of the anvil section 55 x 30 mm. |Maximum opening 205 mm. |Base diameter 125 mm. |Unloading 80 mm. |HOH mounting size 125 mm. |Dimensions of the anvil section 85 x 45 mm. |Dimensions 320 x 105 x 155 mm. |Base diameter 178 mm. |Jaw width 125 mm. |HOH mounting size 150 mm. |Maximum opening 145 mm. |Dimensions 430 x 200 x 195 mm. |Unloading 75 mm. |Dimensions of the anvil section 70 x 35 mm. |Base diameter 150 mm. |Dimensions 380 x 130 x 175 mm. |Jaw width 150 mm. |Maximum opening 190 mm. |Dimensions of the anvil section 75 x 40 mm. |
£ 61,50In stockDelivery time 1 - 3 working days -
HBM 2 x 300 mm. finger clamp for in the vice
Maximum brewing capacity across the entire working width 2 mm. |Maximum working width 300 mm. |Width of the fingers 25 - 50 - 75 - 150 mm. |Maximum seating angle 90 graden. |
£ 131,57Regular price£ 177,62In stockDelivery time 1 - 3 working days -
Heuer - Brockhaus vises
Jaw width 100 mm. |Maximum opening 125 mm. |Clamping depth 50 mm. |Jaw width 120 mm. |Maximum opening 150 mm. |Clamping depth 65 mm. |Jaw width 140 mm. |Maximum opening 200 mm. |Clamping depth 80 mm. |Jaw width 160 mm. |Maximum opening 225 mm. |Clamping depth 100 mm. |Jaw width 180 mm. |
£ 196,25In stockDelivery time 1 - 3 working days -
HBM aluminum top jaws with felt
Magnetic pelvis covered with felt.
£ 5,35In stockDelivery time 1 - 3 working days -
Heuer - Brockhaus turntables
Technical data of the Heuer - Brockhaus Turntables HEUER turntable are made of forged steel, 360 gr. rotatable and lockable in any position The closed receiving plate prevents the ingress of chips and dirt and the slewing ring and receiving plate are finished for good guidance.
£ 61,50In stockDelivery time 1 - 3 working days -
HBM 10 KG Deluxe Anvil
This anvil of HBM has a total weight of ten kilograms. With a height of 155 millimeters, it is not too high. A handy tool during various, diverse activities. Characteristics 10kg cast iron powder coated anvil. Large polished upper surface. Dimensions (LxWxH) 270 x 120 x 140 mm Track width: 65 mm Track length: 130 mm
£ 35,89Regular price£ 39,48In stockDelivery time 1 - 3 working days -
Heuer - Brockhaus table clamps
Technical data of the Heuer - Brockhaus table clamps Simply attach your vice to the table with this handy clamp.
£ 69,58In stockDelivery time 1 - 3 working days -
Heuer - Brockhaus 120 mm. compact vise
Jaw width 120 mm. |Maximum opening 130 mm. |Clamping depth 65 mm. |
£ 228,59Regular price£ 251,45In stockDelivery time 1 - 3 working days -
Heuer - Brockhaus vises with replaceable jaws
Jaw width 120 mm. |Maximum opening 150 mm. |Clamping depth 65 mm. |Jaw width 140 mm. |Maximum opening 200 mm. |Clamping depth 80 mm. |Jaw width 160 mm. |Maximum opening 225 mm. |Clamping depth 100 mm. |
£ 299,57In stockDelivery time 1 - 3 working days -
Skandia bench vice 100mm
This Skandia vise 100 mm, also called parallel vise, is a tool in which a workpiece can be fixed, making it easier to work because these workpieces do not have to be held. In this way, operations such as sawing, drilling, filing, sanding, welding, grinding, etc. can be performed more freely. This vise is made of high-quality cast iron, painted black and has exchangeable hardened steel jaws and a small anvil. The vice can handle workpieces with a maximum thickness of 135 mm. Specifications: Article number: SKA1044375 Barcode: 8711562062178 Brand: SKANDIA Net weight (kg): 0
£ 82,16Regular price£ 106,80In stockDelivery time 1 - 3 working days -
Irwin Assembly vise No. 4 / 115mm
The Irwin Assembly Vise No. 4/115mm is a powerful tool that strengthens your assembly bench. With this screw you can easily build a sturdy mounting bench. The tool is made of high quality steel and has a net weight of 17.58 kg. The screw is easy to assemble and use. This screw from IRWIN is a must-have for any DIY enthusiast. Specifications: Item number: IR4ZR Bar code: 0734442000501 Brand: IRWIN Net weight (kg): 17.58 Suitable for: Assembly bench
£ 179,19Regular price£ 232,94In stockDelivery time 1 - 3 working days -
Irwin Assembly vise No. 1 / 75mm
(1)
Specifications: Item number: IR1ZR Barcode: 0734442000129 Brand: IRWIN Net weight (kg): 5.557
£ 72,28Regular price£ 97,57In stockDelivery time 1 - 3 working days -
Irwin Quick-Adjusting Vice 5 "/ 125mm
(1)
Specifications: Article number: IR1978272 Barcode: 5706919782727 Brand: IRWIN Net weight (kg): 9.86
£ 241,17Regular price£ 337,63In stockDelivery time 1 - 3 working days -
black steel pipe clamp / vises
Unloading mm. |Jaw width 100 mm. |Dimensions of the anvil section mm. |Maximum opening 110 mm. |Base diameter mm. |Unloading 60 mm. |HOH mounting size mm. |Dimensions of the anvil section 55 x 70 mm. |Dimensions mm. |Base diameter 190 mm. |HOH mounting size 163 mm. |Dimensions 380 x 110 x 230 mm. |Jaw width 125 mm. |Maximum opening 125 mm. |Unloading 65 mm. |Dimensions of the anvil section 65 x 80 mm. |Base diameter 200 mm. |HOH mounting size 172 mm. |Dimensions 430 x 140 x 245 mm. |Jaw width 150 mm. |Maximum opening 150 mm. |
£ 60,81In stockDelivery time 1 - 3 working days -
Irwin Table vise / 75mm
(1)
The Irwin Bench Vise/75mm is perfect for clamping workpieces during machining. This solid vise comes with a practical swivel base for added versatility. The jaw width of 75 mm ensures that you can easily clamp different sizes of workpieces. With the Irwin Table Vise/75mm you get a high-quality product. This vise is equipped with robust materials and has a warranty period of no less than 5 years. So you don't have to worry about the reliability of this vice! Specifications: - Item number: IRTV75B - Bar code: 0734442001690 - Brand: IRWIN - Net weight (kg): 1.88 Most important features: - Jaw width of 75 mm - Equipped with a rotatable base - Made of high quality materials - Warranty period of 5 years Advantages: - Easy to clamp workpieces - Extra versatility thanks to the rotatable base - Solid vise for long-term use - High quality from the well-known IRWIN brand - 5 year warranty gives extra security Order the Irwin Table Vise/75mm today and enrich your workshop with this indispensable vice.
£ 71,37Regular price£ 85,65In stockDelivery time 1 - 3 working days -
Irwin Assembly vise No. 3 / 100mm
Buy the Irwin Assembly Vise No. 3/100mm. This robust and reliable propeller from the IRWIN brand is suitable for many different jobs. With this screw you can fix even the heaviest materials. The screw has an article number of IR3 and a barcode of 0734442000488. The net weight of the screw is 12.88 kg. Features of the Irwin Assembly Vise Nr. 3/100mm Robust and reliable Suitable for heavy materials Item number: IR3 Bar code: 0734442000488 Brand: IRWIN Net weight: 12.88 kg The Irwin Assembly Vise No. 3/100mm is a very reliable propeller from the IRWIN brand. The screw is robust and suitable for fastening heavy materials. With this screw you can do all your jobs. Order the Irwin Assembly Vice No. 3/100mm and you are assured of a reliable screw!
£ 151,34Regular price£ 211,87In stockDelivery time 1 - 3 working days