Shopping basket

No products

COVID-19 temporarily: Longer delivery times Telephone customer service limited access

HBM Professional Laser Distance Meters

Why a laser rangefinder?   These types of small rangefinders come in two types: Ultrasonic meters and laser measurement. An ultrasonic rangefinder, measures a distance by measuring the elapsed time between sending and receiving reflected sound waves. This assumes a constant speed of the sound. A laser measurement works in principle the same, all now the reflection of light is used instead of sound. The ultrasonic meters assume that the speed of sound is constant on Earth, but in practice it depends on atmospheric quantities such as temperature and pressure. This alone means that we always have to assess a measurement of an ultrasonic meter with some reserve. There is a certain measurement error “ingrained” in the measurement method because the measurement yields different values ​​under different atmospheric conditions. An ultrasonic measurement can therefore not achieve a higher accuracy than a few centimeters. In addition, the range of a sound wave is not as great as that of a laser beam, due to damping. Finally, the reflection of a sound wave can only be clearly observed if this wave encounters almost perpendicular to a hard surface. Measuring at an angle is therefore not possible with ultrasonic measuring. Laser measurement therefore offers major advantages over ultrasonic measurement: • Laser measurement is very accurate. An accuracy of 1-2 millimeters is achievable at a distance of 100 meters. • Laser measurement is not affected by atmospheric conditions. • Laser measurements can be performed over a wide range, because laser light suffers less from atmospheric damping than sound waves. • Laser measurement can take place at an angle, as long as only part of the laser beam bounces back to the measuring device. Angle measurements therefore go well on diffuse (coarse) surfaces. (An angle measurement with a mirror surface is therefore not possible)   Until recently, laser distance meters were very expensive due to the ultra short measuring times, which place high demands on the speed of the processor and electronics. (The speed of light is 300,000,000 meters per second, while the speed of sound is approximately 331 m / s, so there is almost a factor of 1 million in between!). Thanks to advances in technology and, in particular, miniaturization of electronics, such techniques are now much cheaper to produce… and you can now reap the benefits.   A 50 meter and a 100 meter version: This 50 meter version differs from the 100 meter version on the following 3 points: • The 50 meter version has a black display with white text, while the 100 meter version has black text on the familiar LCD silver background. • The backlight (LED lighting of the display) is white in the 50 meter version, while the 100 meter version has blue lighting. • The 100 meters shows the measured angle, so it can also be used as a level. The 50 meter version is included in the angle in order to be able to perform hypotenuse calculations (eg height measurement from the ground), but does not show the measured angle, so that the 50 meter version cannot be used as a digital level.   The combination with more sensors   Furthermore, both devices are designed in such a way that they get the most out of the advantages of laser distance measurement, which is additionally supplemented with sensors such as an electronic balance organ (a so-called IMU - inertial measurement unit, originating from the smartphone (and drone) industry). . Thanks to this unit, angles can be measured.   If one combines laser measurement with angle measurement, this means that (with a little math) the following (new) quantities can be performed based on these angle and distance measurements: • Distance measurement (basic functionality) • Relative distance measurement (add / subtract measures) • Overhang (hypotenuse / hypotenuse) length measurement • Angle measurement (level function - only with the 100 more version) • Height measurement - For example, by beaming the highest point of a wall with the laser, while the laser is held close to the ground at some distance from the wall, the height of the wall can be read! • Surface measurement (by measuring multiple points) • Content measurement (by measuring multiple points)   Other specifications of this laser distance meter   • Range 50 or 100 meters (depending on the model) • IP65 (splash and dust proof), The device can not withstand immersion under water and water under (high) pressure, but can withstand falling into a puddle. • Addition and subtraction function (relative measurement) • Continuous measurement (real-time!) • Robust housing (drop-resistant up to a height of 2 meters) • 2 "white text on black background (50 meter version) or black text on gray background (100 meter version) • Selectable measurement reference point: front and rear • Material: ABS with a rubber (TPU) outside edge • Charging time: 4 - 4.5 hours. • Automatic Power-off function.   Delivery contents • 1x laser rangefinder • 1x storage bag • 1x wrist strap • 3x NiMH AAA battery (900 mAh x 3) • 1x user manual.

€ 43,99 (inc. 21% VAT)

HBM 274 Piece XL Premium Filled tool trolley With Door and Carbon Inlays

Technical data of the HBM 274 Piece XL Premium Filled tool trolley With Door and Carbon Inlays. Contents Tray 1 1/4 "Premium Ratchet. 1/4 "elbow 45 mm. 1/4 "Extension 100 mm. 1/4 "Sockets 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 "Long Sockets 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 "Premium Ratchet. 3/8 "Elbow 55 mm. 3/8 "Extension 150 mm. 3/8 "Sockets 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 "Long Sockets 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 "Premium Ratchet. 1/2 "elbow 75 mm. 1/2 "Extension 125 mm. 1/2 "Sockets 8, 9, 10, 11, 12, 13,14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm. 1/2 "Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 mm. 1/2 "impact sockets with protective sleeve 17,19,21,22 mm. TRAY CONTENTS 2 1/4 "Recording bits TT8, TT9, TT110, TT20, TT25, TT27, TT30, TT40. 1/4 "Recording bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4 "Recording bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4 "Recording bits S0, S1, S2, S3, S4. 1/4 "Recording bits V6, V8, V10. 1/4 "Recording bits H6. 1/4 "Recording bits FD4, FD5.5, FD6, FD7. 1/4 "Recording bits PH1, PH2, PH3. 1/4 "Recording bits PZ0, PZ1, PZ2, PZ3. 1/4 "Recording bits H2, H4, H5. 8mm Recording bits PZ1, PZ2, PZ3, PZ4. 8mm Recording bits PH1, PH2, PH3, PH4. 8mm Recording bits T20, T27, T30, T35, T40, T40, T45, T45. 8mm Recording bits SL 4, SL5.5, SL6, SL6.5. 8mm Recording bits hex 7, 8, 10. 1/2 "recording bits M18 Spline (POWER) 1/2 "recording bits H14, H17, H19, H22, H24. 1/2 "recording bits M16 Spline. 1/2 "recording bits M16 Spline 100 mm long. 1/2 "recording bits T80 - 100 mm long. 1/2 "recording bits M9, M16 - 100 mm long. 1/2 "recording bits R9 - 100 mm long. 1/2 "recording bits R10 - 140 mm long. 1/2 "recording bits T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2 "recording bits H10, H11, H13 - 140 mm long. 1/2 "recording bits M10, M12, M14 - 140 mm long. 1/2 "recording bits H5 - 160 mm long. 1/2 "recording bits H7 - 230 mm long. 1/2 "recording bits R7, R8 - 230 mm long. 1/2 "recording bits H7 - 230 mm long. 1/2 "recording bits T30 - 300 mm long. 1/2 "Adapter to 10 mm square. TRAY CONTENTS 3 Ring, Ratchet, Open-ended spanner set with tilting head Consisting of. Sizes 8, 9, 10, 12, 13, 14, 15, 17, 19, 21, 22 mm. Ring open ended spanner set Consisting of. Sizes 8, 9, 10, 12, 13, 14, 15, 17, 19, 21, 22 mm. TRAY CONTENTS 4 T-handle Inbus with ball end. 2 x 100, 2.5 x 100, 3 x 100, 4 x 150, 4.5 x 150, 5 x 150, 6 x 150, 8 x 200, 10 x 200 mm. T-handle Inbus. 2 x 100, 2.5 x 100, 3 x 100, 4 x 150, 4.5 x 150, 5 x 150, 6 x 150, 8 x 200, 10 x 200 mm. TRAY CONTENTS 5 Screwdrivers Flat. 2.5x50, 3x75, 4x75, 5x75, 5x100, 6x100. Screwdrivers Cross. PH 2.5x50, 4x75, 4x75, 5x75, 6x100, 8x150. Impact-resistant screwdrivers Flat. 5x75, 6x100, 8x150, 6x38 Stubby. Impact resistant screwdrivers Cross. 5x75, 6x100, 8x150, 6x38 Stubby. TRAY CONTENTS 6 Water pump pliers 250 mm. Diagonal cutters 150 mm. Combination pliers 150 mm. Pointed nose pliers 150 mm. Curved Point Nose Pliers 150 mm. Locking pliers 200 mm. Cold chisel with handle 19 mm wide. Cold chisel with handle and point 6 mm wide. No-recoil hammer 340 mm. Bank hammer with fiberglass handle. Fist with fiberglass shaft. TRAY CONTENTS 7. Bank hammer with fiberglass handle. Installation hammer with fiberglass shaft. Drift punches 2x170, 3x170, 4x170, 5x170, 6x170, 8x170, 10x170. mm. Dowel 2x170, 3x170, 4x170, 5x170, 8x170, 10x170 mm. Center punch 6x170mm. Cold chisel 6x170, 12x160, 16x180, 19x180 mm. Other specifications. Equipped with extra durable and durable CARBON look inlays. Tool trolley is equipped with 7 bearing-mounted drawers. Tool trolley is equipped with 2 normal and 2 swivel wheels, 2 with brakes. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a lift up closure over the entire width of the drawers and soft close. Handy top plate with dividers. Raised edge all around. Central lock. Sturdy handle. Height-adjustable storage compartment behind the door. Heavy quality wheels 125 x 30 mm. Overall dimensions with wheels and handle: 1120 x 460 x 990 mm. Overall dimensions without wheels and handle: 1030 x 460 x 820 mm. Inner dimensions from la 1 to 6: 550 x 400 x 50 mm. Dimensions of the 7th drawer: 540 x 400 x 200 mm. Dimensions of the door: 320 x 700 mm. Inside dimensions behind the door: 320 x 700 x 400 mm. Packaging dimensions: 1045 x 505 x 1010 mm. Weight: 100 Kg

€ 1082,04 € 901,70 (inc. 21% VAT)

Olimpia Splendid Dolceclima Compact 9 Mobile air conditioner - 2340W - 30m²

The Olimpia Splendid Dolceclima Compact 9 P Mobile Airco has an A class label and is therefore energy efficient. It has a cooling capacity of 2.34 kW. The Dolceclima Compact 9 P is a perfect air conditioner for a bedroom, living room, hobby room or office. The Dolceclima Compact series is a very compact series. With a height of 70 cm and a width of only 35 cm, this series is also easy to place in smaller spaces. Dolceclima series mobile air conditioners have Blue Air Technology for optimal distribution of the cooled air. The cooling of a room is therefore faster and the cooled air is above all perfectly distributed in the room. The completely new line of Olimpia Splendid mobile air conditioners are equipped with the environmentally friendly, natural R290 gas. Technical data of the Olimpia Splendid Dolceclima Compact 9 Mobile air conditioner - 2340W - 30m². Net weight 29 Kg. Number of positions 4. Dimensions width 345 mm. Dimensions depth 355 mm. Dimensions height 703 mm. Capacity 9000 BTU / h. Energy label A. Noise level 62 dB (A). Suitable for 30 m². Colour White. R290 cooling system. Voltage 220-240 Volt. Power 2.34 kW.

€ 512,26 € 379,45 (inc. 21% VAT)

Olimpia Splendid Dolceclima Compact 8 Mobile air conditioner - 2100W - 27m²

The Olimpia Splendid Dolceclima Compact 8P Mobile Air Conditioner 2.1 kW is the ideal mobile air conditioner for those hot summer days! This energy-efficient air conditioner has a high efficiency and has an energy class A. Enjoy the wonderful cooling with this air conditioner from Olimpia. The Olimpia Splendid Dolceclima Compact 8P Mobile Airco 2.1 kW has practical handles on the side and wheels, so you can easily move the air conditioner to the desired space. The air conditioner has a fan mode, which can also be used alone without turning on the air conditioner function. This mode has 2 modes. Thanks to the automatic mode, you benefit from the convenience of automatic operation. This control controls the cooling in relation to the ambient temperature to optimize energy. The Olimpia Splendid Dolceclima Compact 8P Mobile Airco 2.1 kW also has a dehumidification mode and a turbo mode. Turbo mode creates optimal fan speed and extra cool air. Are you looking for an air conditioner for your bedroom? Then this air conditioner from Olimpia is optimally suited. The air conditioner has a sleep mode. With this mode you ensure that the set temperature is gradually increased and there is less noise, so you can enjoy your night's sleep without waking up to the sound of the air conditioning. Technical data of the Olimpia Splendid Dolceclima Compact 8 Mobile air conditioner - 2100W - 27m². Net weight 29 Kg. Number of positions 4. Dimensions width 345 mm. Dimensions depth 355 mm. Dimensions height 703 mm. Capacity 8000 BTU / h. Energy label A. Noise level 63 dB (A). Suitable for 27 m². Colour White. R290 cooling system. Voltage 220-240 Volt. Power 2.1 kW.

€ 448,44 € 344,95 (inc. 21% VAT)

HBM Professional FFP2 Dust Mask - 10 Pieces

Personal protection during every job. Our dust masks have a protection class of FFP2 and protect against smoke, fine dust and mist. The masks offer you the possibility of responsible travel and jobs. The face masks have good filtration and are equipped with elastic ear loops for perfect wearing comfort. Due to the fit, there is no visual impairment when wearing the dust mask. The masks are CE certified (EN149 - FFP2), which means they have been found safe and reliable for non-medical use according to European regulations. A mouth mask with this certification filters at least 95 percent of all airborne particles. In addition, wearing mouth masks minimizes the chance of cross-contamination of bacteria. Packed per 10 pieces.

€ 41,34 € 34,45 (inc. 21% VAT)

HBM 2200 Watt Professional Circular Saw Table With Roller Table

Technical data of the HBM 2200 Watt Professional Circular Saw Table With Roller Table. Motor power 2200 Watt / 3 Hp. Voltage 230 Volt. Saw blade speed 4750 rpm. Saw blade diameter 254 mm. Saw hole bore 30 mm. Saw blade tiltable 45 degrees. Cutting depth at 90 degrees 80 mm. Cutting depth at 45 degrees 65 mm. Table dimensions of the main table 310 x 670 mm. Table dimensions of the extension table 400 x 670 mm. Dimensions of the trolley 1000 x 247 mm. Maximum displacement of the roller table 1600 mm. Maximum size plate for the saw 1200 mm. Working height mm. Net weight Approx. Kg. Gross weight Approx. Kg. Packaging dimensions mm. The HBM 2200 Watt Professional Circular Saw Table With Rolling Table comes standard with. HBM 254 mm. Widia saw blade with 40 Teeth. Longitudinal guide with fine adjustment. Miter guide with eccentric clamp. Connecting hose with Y-piece. Adjustable cutting height and cutting angle. Saw hood with intrigued dust extraction. Ball bearing roller table with material clamp and adjustable stop. Push stick. Operating tool. Other specifications. Powerful drive motor ensures optimum cutting performance even during extended use. Fitted with table extension and extension as standard for laying larger plates. For optimal working conditions, an exhaust can be connected to the 100 mm hose connection. Angle adjustment of the saw blade to 45 ° according to the scale with the handwheel. Solid gray cast iron table with T-slot guide for the miter guide. Large gray cast iron machine table, fully milled and ground. Machine body consisting of a torsion resistant steel gray cast iron construction. All aluminum parts (table size, stops, ...) are anodized. Standard table widening makes it easier to cut large sheets.

€ 1372,55 € 1016,70 (inc. 21% VAT)

HBM Storage cupboard, Storage system, Rack with 12 storage bins

The storage bins are made of polypropylene that is not affected by weak acids and alkalis and is rust and corrosion resistant. The versatile storage boxes can be used on their own, placed on racks or stacked on top of each other. They can also be used with slats or cabinets to form a large storage system. The wide opening at the front makes it easy to access and select the content. With these storage bins at hand, you are able to keep your items well organized for both the convenience of future use and the orderly organization of the workshop. Technical data of the HBM Bakkenkast, Storage system, Rack with 12 Storage bins. Total dimensions 85 x 40 x 90 cm. Dimensions of the bins 26 x 40 x 16 cm. Inside dimensions of the bins 23 x 35 x 15.5 cm. Thickness of the MDF Top plate 10 mm. Material of the bins PP (polypropylene) Other specifications. Equipped with wear-resistant and scratch-resistant powder coating. The bins are easy to label by label list / insert compartment.

€ 128,73 € 91,95 (inc. 21% VAT)

Popular & new  
NEW
  • Order quickly and safely at Toolsidee. We deliver throughout Europe.
  • Our customers rate Toolsidee on average with a 9.5 of the 176 reviews
  • Do you have a question? Please contact us at +31(0)182-787368 or mail us info@toolsidee.nl

Best-selling products

Last viewed products